Free download VNCI 6154A Device Manager V2.5 and install it on Windows10 64-bit professional edition.
Free download VNCI 6154 Manager V2.5
Language: English, Chinese
Computer System requirements:
- Windows10 64-bit professional edition
- 4GB of memory
- At least 100GB of free space on the C driver
Update Info:
Update time: July 11th, 2023
Firmware update to 1.1.1.4
Fix bug: Some parameters can not be displayed when read multiple parameters for TP20 protocol.
Fix bug: WFB page pending sometimes.
How to install VNCI 6154A Device Manager?
After downloading, open the application
Select the software language (English or Chinese)
Select Destination location>> Components>> Start Menu Folder>> Additional Tasks>> Install>> Complete the installation
Then VAS6154A Device Manager is ready to use.
- Firmware update:
Connect VNCI 6154A VAG diagnostic tool and computer via USB cable, wifi or WLAN local area network to enable network
Click Device Information>> Upgrade
If there is a new version, the version display on server and local will be different.
Click “Upgrade” to one-click upgrade automatically.
Reference:
- Change SN:
Purpose:
To make the online account can communicate with the original VAG factory server, so the serial number must be changed as original one. The online coding/programming function can be used after verification of the original factory.
Each VNCI 6154A comes with one free point, and users only have one free opportunity to change serial number with the point. The serial number you want to change must be coordinated with S/N of the original equipment.
If you want to change the 2nd serial number, you have to pay for recharge points. Contact our customer service for point price.
Requirements to change VNCI 6154A serial number:
1.Users should have an original ODIS device (VAS 6154A) with genuine S/N.
- If the original device is broken/damaged, you can add the original S/N to VNCI 6154A to perform online coding/ Don’t need to buy extra original equipment(save money).
- If you need to carry out for outdoor work, the original deviceis not required to take out, just switch S/N in 6154A VNCI and you can do online coding/programming outside.
2.Must enable internet connection for S/N changing.
3.Require one or above point to change serial number (1 point= 1 S/N)
NOTE:
If customer only has a vnci 6154a without the original equipment, the serial number also can be changed, but the precondition is the customer has to get the serial number of the original equipment on your own, and then write into vnci6154.
Steps to change SN:
Connect VNCI 6154A diagnostic tool and computer via USB cable, wifi or WLAN local area network to enable network
Click Device Information>> Change SN
Check the available points, make sure you have one or more points, then input the new S/N (original device S/N), and press Change S/N to complete the process.
Customer Service:
E-Mail: Sales@UOBDII.com
WhatsApp: +86-13995696053
Phone: +86 13995696053
Skype: UOBD2.COM
