Lonsdor K518 Pro Read Fiat IMMO Data and Program Key

Lonsdor Tech released new Fiat Immobilizer software for K518 Pro and K518 series key programmer on April 23rd, 2024. Check the latest update info and learn how to read IMMO data and program new keys to Fiat via OBD.

Update Info:

1.Newly added the following Fiat models:

Grand Punto/2005-2014

500/2006-2017

Nemo/2007-2017

Bipper/2007-2017

Cinquecento/2007-2021

MiniCargo/2008-2021

Qubo/2008-2021

Fiorino/2008-2021

New Fiorino/2008-2021

Punto/2009-2021

Punto Evo/2009-2021

Pratico/2010-2021

Doblo/2010-2021

Viaggio/2011-2018

Panda/2011-2021

500C/2011-2021

Avventura/2014-2018

Egea/2018-2021

Tipo/2018-2021

Linea/2018-2021

500X/2018-2021

500E/2018-2021

New 500/2020-2022

New 500C/2020-2022

2.Support add key and all keys lost

*2018+ Fiat models require Lonsdor L-JCD cable.

How to read IMMO data and program key to Fiat by Lonsdor K518 Pro?

i.e. Fiat 500

Connect K518 Pro key programmer to a Fiat car, power on device, and connect to WiFi

Select Immo & Remote>> FIAT>> Select from vehicle>> Europe>> 500>> Mechanical key>> 2006-2017>> 70F3633_93C86_46

Step 1: Read IMMO data

Select [Read immo data]

Read out the chip, key type, Pincode, key count and key ID

Input a file name to save the IMMO data

Read and save Imm data successfully.

Step 2: Make dealer key

Select [Make dealer key]

And select the IMMO data just saved in step 1

Push open the card slot’s baffle on Lonsdor K518 Pro key programmer

Identify the current key ID

Generate and lock the dealer key successfully

Step 3: Program key

Select [Program key]

Insert the new key into the card slot of K518Pro key programmer

Switch ignition on

Enter the PINCode

Program key successfully

Done!