(21-12-2018) Good to know: The latest Ksuite 2.25 is verified to work perfectly with Ktag firmware 7.020, no issues of ECU read/write. Have been tested successfully on an ECU ME 9.7 from Mercedes-Benz W203 2003.
This article UOBD2 will show you a step-by-step guide on how to use KAG to read/write Mercedes Benz ME9.7.And try this procedures at your own risk! […]
For a auto repair mechanic,it is necessary to get the skill of restore Benz ECU data from original to a new replacement.
I should say KESS V2 V5.017 + KTAG V7.020 + ECM TITANIUM are good match, no one tool is perfect, but if one ECU tunner has all of them the tunning work will be more easier.
Kess is mostly for working over the OBD Port in the Car. For newer cars from 2011 with EDC17/MED17… ECU they archieved the Virtual Reading, so you have to make ID of ECU and get the ORI File from Alientech (not for clones!) or from your Tuner.
Let’s start with the below comparison image between KTAG V7.020 and KTM100 V7.003 ECU programmer.
To the users of KTAG, KESS , KTM and Dimsport Trasdata:uobdii.com is available with a full set of BDM adapters (22 pieces in total). ECU tunner will very happy with this.
It’s saying that KTAG FW 7.020 add more than 100 new ECU protocols.But do you know exactly which ECU supported by KTAG FW 7.020 while older KTAG 7.003 and KTAG 6.070 are not?
This post includes Ktag fw 7.020 China Clone PCB, Ktag fw7.020 ECU clone PCB.
Here you will know how to install KTAG Ksuite 2.23 software for KTAG Firmware 7.020 on Windows XP and KTAG token reset Q&A.
Here is a tutorial for using KTAG Master ECU Programming Tool to read VAG Audi A3 ECU EDC17C46 on bench. Steps are as follows:
Here this blog will show you how use KTAG Master to read Peugeot Boxer ECU Visteon DCU-102 (FOCOMO) in boot mode step by step!
Here are two working solutions for you— when you connect KTAG K-TAG ECU Programming Tool to Internet unconsciously and K-TAG is locked. (Both two solutions are
As a professional mechanic, I have done a lot of research on ECU programmer, I was impressed on two products KTAG and KESS V2. Here I will Share my understanding of them.
How to choose right ECU chip tuning tool? Which ECU tuning tool to buy? KESS, KTAG, CMD or BDM100… All these questions confused you will disappear…
K-TAG ECU programmer has released to the version V2.11. It specializes in BDM function. What should be noticed when using the K-tag programmer? Following are helpful notes for owners.
The china no reworked ktm100 FW V7.003 and ktag v6.070 distinguish the outlook, serial number and the maintenance of SDCard, besides the ktm100 V7.003 can cover more ECU…
Copyright © 2025 | WordPress Theme by MH Themes
