Ford Edge 2015 Program Keys by Xtool X-100C and iPhone

The Xtool X100C is a perfect iOS and Android based key programmer and pin code reader which is specialized for Ford, Mazda, Peugeot and Citroen. This article will teach you how to program Ford Edge 2015 key via X100C and iPhone. Hope it helps!

 

Equipment needed:

*Xtool X100C Auto key programmer

*iPhone

*Remote blank Keys

Vehicle model:

Ford Edge 2015

 

Remote Blank Keys

xtool-x-100c-auto-key-programmer-1

 

First of all, Enter the Bluetooth setting and pair the iPhone Bluetooth with X100C, if you don’t know how to do this, see the User Manual:

Xtool-x100-c-user-manual.pdf

 

Click to enter [Immobilizer] option

xtool-x-100c-auto-key-programmer-2

Then choose [Ford]-> [China Ford]-> [Smart Key System]->[Edge]->[2015-]

xtool-x-100c-auto-key-programmer-3

 

Then turn on the ignition switch and press OK to continue

xtool-x-100c-auto-key-programmer-6

Choose [Add a key]

xtool-x-100c-auto-key-programmer-7

Then open the hazard warning light and press OK to continue

xtool-x-100c-auto-key-programmer-8

And open the driver door then close the driver door

Then turn off the ignition switch and press OK

xtool-x-100c-auto-key-programmer-9

It is communicating…

xtool-x-100c-auto-key-programmer-10

The key into the card slot, Press OK

xtool-x-100c-auto-key-programmer-11

Done! A key has been programmed success!

xtool-x-100c-auto-key-programmer-12

To program the next remote key, press YES

Put another key into the card slot, Press OK

Done!

 

For more information about Xtool X100C (such as supported car list), click the link:

http://www.uobdii.com/wholesale/xtool-x-100-c-for-ios-and-android-auto-key-programmer.html

(Visited 95 times, 1 visits today)