Scania Multi 1812 [12.2018] free download on mega and Win7 installation
Offer Scania Multi 12.2018 100% safe source and free source for your choice, Scania Multi 12.2018 installation on win7 and detailed menu map. Part […]
OBDSTAR X100 PRO in gray color VS OBDSTAR X100 PRO in Red color
This article is available with the Difference between OBDSTAR X100 PRO in gray color (2019 version) and OBDSTAR X100 PRO in red color (2015 version). The gray color combine C type (immo) + D type (odo)+ E type(eeprom) at 200USD cheaper.
How to install Clamp M1/2/3/4 on Condor Mini PLUS key machine
Here are guides on how to install Jaw m1/2/3/4 on Xhorse Codor Mini Plus: 1) Loosening the clamp tightening wrench by turning it counter-clockwise to […]
OBDSTAR OBDPROG Key RT Key Renew Tool User Manual
OBDSTAR has a new brand name OBDPROG, and OBDPROG has a new device named “Key RT” which is used to renew key for a wide range of car brands and Key master chip types.
Cummins INSITE 8.5.0.57 Win7 Installation: Calibrate ECM & Read / Write ECU OK
Crack Cummins INSITE 8.5.0.57 with patch is installed on win7 32bit /64bit successfully, and tested working fine with Cummins INLINE 6, INLINE 7, NEXIQ, NEXIQ 2, DPA5 etc…
How to use Yanhua BCM tester for Porsche key remote detection?
Topic: how to use Yanhua Porsche BCM tester to detect whether the current key remote is working or not; how to check if the current key can start the vehicle.
VVDI2 BMW CAS4/CAS4+ thru OBD: Worked with VVDI2 6.6.1 update!
Xhorse vvdi2 version 6.6.1 is confirmed to work with CAS4/CAS4+ thru OBD.
Can Yanhua ACDP Programming for BMW 6HP/8HP gearbox Reset?
It’s confirmed that Yanhua Mini ACDP can clear BMW 8HP ISN & refresh 6HP data successfully.
Solution to Cummins INSITE 8.2.0.184 License Activation Error
Have Cummins INSITE 8.2.0.184, I entered one user name and one registered password, then click on “Enter”, the windows appear.
How to use NCS Expert for BMW E65 VO change
This instruction show you guide on how to use BMW NCS Expert to change VO for BMW E65
Ford F150 2016 Key Programming by OBDSTAR X300 DP Plus
This instruction show you guide on how to use OBDSTAR X300 DP Plus to program key for Ford F150 2016.
ETKA 8.2 Parts Catalogue Released Notes (New Features)
The new ETKA version 8.2 embodies the ‘sharing made easy’-concept and includes many technical optimizations, which lay the foundation for all upcoming ETKA versions.
Toyota Land Cruiser Prado 2013 Lost Keys, program key with VVDI2
This instruction show you guide on how to do key programming for Toyota Land Cruiser Prado 2013.
How to update ETKA 8.2 parts catalogue
This is for those who are looking for a way to update parts information ETKA 8.2.(it’s for educational purpose. thanks you, SeedStorm)
VVDI Key Tool from 2.3.5 firmware is GL version(Global) for customers
I confirmed from few sources – they already stopped manufacturing of original Key Tool. I was stupid enough to upgrade to version 3.2.5.
How to rework CarProg S/N CAR001, CAR003, CAR005
This Carprog rework instruction here is for educational purpose. Hope it’s helpful!uobdii.com holds no responsibility for anything you will do on your carprog. Good luck!
Free download ECU programmer software: Ksuite, iprog+, xprog, ktm bench, carprog etc.
This article is available with the Mega free download links of China Clone ECU programmers i.e Ksuite for KESS V2 /Ktag, iprog+ programmer, ktm bench, […]