I modified my D-can cable and installed a switch in order to have it operational with 2006 and earlier models that use the OBDII port. My cable did not come with an adapter… 2/2007 and older vehicles…
I’ve been spending the past few days getting BMW INPA scanner and other programs installed on my laptop. I soldered the 7 and 8 connectors on my cable and finally I was able to read my steering angle sensor status.
(Feb. 07th, 2018) Free download ISTA+ 4.09.33 Standalone and SQLiteDB’s on Mega.
Following parts are tracked back to m5board forum. Thanks to NAK91’s question and solutions.
INPA vs ISTA+ (Rheingold) is a hot topic on BMW forums all the time. It’s a write-up of opinions collection of “how to people think of INPA and ISTA+”.
Good news for sharing: Here you can free download 06.2017 newly released BMW ISTA-D 4.05.32 Standalone + BMW ISTA-D license!
BMW INPA Ediabas full English version installation tutorial here. Enjoy yourself!
BMW INPA 5.0.6 download here, which is tested without issues to work with K+DCAN usb cable with inpa bmw e46 and inpa bmw e90. Enjoy
This is a useful guide for you to reset BMW airbag light quickly using INPA K+DCAN Cable. It will cost you only $14! Follow below steps and you will easily turn off the airbag light for your Bimmers.
I have a 2008 E90 N54 vehicle. I have spent quite some time researching, trial and error with installing INPA and trying to code my injectors. I successfully did the job several days ago, here…
It’s a full BMW INPA software for F and E series models. Wish this helps.