This article is available with the Difference between OBDSTAR X100 PRO in gray color (2019 version) and OBDSTAR X100 PRO in red color (2015 version). The gray color combine C type (immo) + D type (odo)+ E type(eeprom) at 200USD cheaper.
Here are guides on how to install Jaw m1/2/3/4 on Xhorse Codor Mini Plus: 1) Loosening the clamp tightening wrench by turning it counter-clockwise to […]
OBDSTAR has a new brand name OBDPROG, and OBDPROG has a new device named “Key RT” which is used to renew key for a wide range of car brands and Key master chip types.
Crack Cummins INSITE 8.5.0.57 with patch is installed on win7 32bit /64bit successfully, and tested working fine with Cummins INLINE 6, INLINE 7, NEXIQ, NEXIQ 2, DPA5 etc…
Topic: how to use Yanhua Porsche BCM tester to detect whether the current key remote is working or not; how to check if the current key can start the vehicle.
Xhorse vvdi2 version 6.6.1 is confirmed to work with CAS4/CAS4+ thru OBD.
It’s confirmed that Yanhua Mini ACDP can clear BMW 8HP ISN & refresh 6HP data successfully.
Have Cummins INSITE 8.2.0.184, I entered one user name and one registered password, then click on “Enter”, the windows appear.
This instruction show you guide on how to use BMW NCS Expert to change VO for BMW E65
This instruction show you guide on how to use OBDSTAR X300 DP Plus to program key for Ford F150 2016.
The new ETKA version 8.2 embodies the ‘sharing made easy’-concept and includes many technical optimizations, which lay the foundation for all upcoming ETKA versions.
This instruction show you guide on how to do key programming for Toyota Land Cruiser Prado 2013.
This is for those who are looking for a way to update parts information ETKA 8.2.(it’s for educational purpose. thanks you, SeedStorm)
I confirmed from few sources – they already stopped manufacturing of original Key Tool. I was stupid enough to upgrade to version 3.2.5.
This Carprog rework instruction here is for educational purpose. Hope it’s helpful!uobdii.com holds no responsibility for anything you will do on your carprog. Good luck!
This article is available with the Mega free download links of China Clone ECU programmers i.e Ksuite for KESS V2 /Ktag, iprog+ programmer, ktm bench, […]
Xtuner Company Upgrade!!!XTUNER T1 Diesel truck update in July, 2019.Gasoline cars update within 6 months (VPECKER, Xtuner E3, VPECKER E4)
Copyright © 2026 | WordPress Theme by MH Themes
