Which Model of Car HUD Head Up Display to Buy?
In this article you may find same and difference between these models F01, W01, W02, F02, W03 and S5 .And you will know how to choose them and make full use.
Articles by uobdii
Toyota Camry change mileage with Digimaster 3
How to change mileage for Toyota Camry with Digimaster 3? Please follow the instructions as follows.
Autel DS708 Update Version-MaxiSys MS906 Is Released!
Here’s all about original Autel MaxiSys MS906 diagnostic tool for more than 80 car makes in the market.
Solution for VVDI “Device Internal Error”
Please kindly check the error message” Device Internal Error”. This message pops up when I launch VVDI MB tool software while my VVDI is connected.
TOYOTA TIS Techstream 10.30.029 Free download &Update Guide
This is TOYOTA TIS Techstream 10.30.029 update and installation guide. Tis v10.30.029 has been successfully on mini vci (for 22pin), new mini vci, xhorse mvci, mangoose, vxdiag vcx nano for toyota.
$599 to buy SKP900 for Key Copy on Ford Edge
Lucky to get the cheapest SKP-900 key programmer for $599($60 saved).
And did copy Edge smart key this morning.
CONDOR XC-007 VS Italy cutting machine VS Clone cutting machine
CONDOR XC-007 VS Italy cutting machine VS Clone cutting machine As an experienced locksmith, I am often asked which one key cutting machine is […]
BMW e91 318d read write EDC17 c41 DDE8 error with KESS V2
It means KESS V2 can’t read and write this type of ECU, ECUs on the same car model in different areas are sometimes encrypted in different ways, and therefore the tool cannot always work on the same car model.
(Solved) Kess v2 error “External exception EEFFACE
I replaced chip and reset tokens, then get connection error “External exception EEFFACE” as following picture shows.
SKP-900 Key Programmer V4.1 New Information
Here’s the new information for the skp900 4.1 version key programmer for $619.
(Solution)after AK500+ write key, the remote doesn’t work
AK500+ Problem: after use AK500+ key programmer to read out MCU data in the EIS, I input EIS data into SKC calculator to alternate key data, and then write the key data into key. Then I can start up the vehicle, no remote control.
Tuirel S777 machine not display after format the card
Hello help me please I did buy the Tuirel s777 the sn number is 680130013xxx the machine was working without update software when did I try to update the card …
How to recover FTDI eeprom if Galletto is not recognized
This is the instruction on how to recover FTDI eeprom even if Galletto is not recognized correctly by Windows.
How to install Porsche PET 7.3 on Windows 8
This is a installation guide of Spare Parts Catalog for Porsche Cars PET 7.3, tested by one user at UOBD2. Hope this helps you all.
Top selling car diagnostic tool under US$100
This article introduce what different about JLR Mongoose Pro,JLR Mongoose,MINI VCI and Opcom 2012V.
SVDI VS FVDI VS VVDI
Recently, UOBD2.NET offer one new multi-functional tool, it is SVDI, and don’t you think it looks like FVDI and VVDI, no matter what the outlook or the product name. Yes, it is a higher version compared with FVDI and VVDI.
Porsche PET Revision 7.3 Update 342/ 31 released
Spare Parts Catalog for Porsche PET 7.3 has released revision version. Come to free download PET Revision 7.3 update 342/ 31 and get new info. […]