BMW E90 RDC Module coding with NCSexpert and D-can cable
RDC Module need coding when replaced. Fact is, it does need to be set to the car and can be done with NCSexpert and Inpa […]
RDC Module need coding when replaced. Fact is, it does need to be set to the car and can be done with NCSexpert and Inpa […]
To have Russian language, please download and install the following Autek Ikey 820 Update Tool V1.6(Russian):
Can OBDSTAR X300 DP Plus add new key on VW Polo 2017 NEC35XX(MQB) Dashboard?Can OBDSTAR X300 DP Plus add new key on MQB remote key for Vw Polo 2017 NEC35XX(MQB) 2014.06 Dashboard?
2002 VW Jetta 1.8L original PCM was faulty.“In-circuit” Eeprom programmed a donor PCM ST95040 Eeprom with the Autel IM600 and new and improved XP400 = Success
Problem: When I used Yanhua acdp to clear 8hp 45 isn, I got prompt “EGS version does not support”. uobdii.com engineer replied: Please […]
Example: to change the trans fluid on this car (I don’t believe that any automotive fluid is really “lifetime”) you have to complete the final fill at a certain operating temp range – this tool will give you real time data.
No additional purchase required for the clamps of these types of keys (HU66,HU64, VA2, TOY2, BW9, SIP22, HU162T, LDV etc). like Kukai SEC-E9
Here, have collected answers under a post about ” What kinds of key cutting machine do you use?” James Kennedy Triton Fórizs Józsi Xhorse condor Mini […]
Yanhua acdp programmer can read most 2008 BMW 335 ISN, for 100% confirmation, please provide me with the car VIN number to check the specific DME model.
In this instruction,uobd2 will show you guide on how to use VVDI MB Tool to renew Mercedes Benz SIM271DE2.0 & SIM271KE2.0.
It is necessary to remove and solder for BMW CAS4 data reading,it will cause data damaged/loss.So here give the solution without removing and soldering during…
My ENET cable has arrived. I definitely want to do the anti-dazzle, widescreen CarPlay, and possibly VLD.
Newest ECU programmer Iprog+ Pro clone V80 update, it is different from Iprog+ V77 in the aspect of car models.
MHH Poll: Compare about IM608 from Autel Maxisys Elite and Obdstar DP+ and Lonsdor 518, which Is Better?
I’ve logged in here I got to boot Launch X431 V up. I did a system scan to see what modules it’s equipped. We’re gonna enter into the wireless control module that will go hop in the car hopefully.
Receiving 2M2 Tank key cutting machine, I test it and find it makes unusual noise. I took two short videos. Hope you help me out.
It’s becoming second nature for many repairs — reprogramming vehicle control modules with updated calibration files using the Service Programming System (SPS).
Copyright © 2024 | UOBD2 Official Blog