I’ve been spending the past few days getting BMW INPA scanner and other programs installed on my laptop. I soldered the 7 and 8 connectors on my cable and finally I was able to read my steering angle sensor status.
Kess is mostly for working over the OBD Port in the Car. For newer cars from 2011 with EDC17/MED17… ECU they archieved the Virtual Reading, so you have to make ID of ECU and get the ORI File from Alientech (not for clones!) or from your Tuner.
Recently,UOBDII receive a email from our regular customers.He share experience on VVDI Prog read AM29F200BB70M3. First, it’s the case…failed to read AM29F200BB70M3 In […]
OBDSTAR X300M, the first generation of professional odometer adjustment tool via OBD, is something better than the rebadged OBDPROG MT401, although they are the same in the functions and vehicle coverage.
Recently,some UOBD2 customers feedback that they “Error:E0-94” occur when they using VVDI2 software.So here UOBD2 engineer share the method to solve this problem. Please repair […]
If you are a OBDSTARer,you must have question about OBDSTAR programming for BMW CAS1-4.So here UOBDII engineer share the collection of OBDSTAR on BMW Key Programming.And here we take OBDSTAR X300 DP PAD as example.