Problem 1: have an issue with a ktag clone, it identifies ECU ME7.1.1 vag HWI (P48) as the wrong ECU BOSCH ME7.5 VAG HW I (P48).
Now obviously I know its an ME7.1.1 because it says so on the cover and the lay out of board matches the photo on ktag.
Problem 2: I closed the program and reopened it and then all my vag protocols went to being grey …
Working Solution:
Buy a quality micro sd card and do the update.
Where to get the quality micro sd card?
There is a TF card on the motherboard of KTAG Clone, if your Ktag is from uobdii.com and the TF card is broken, please directly contact for a new one.
How to do the update?
- Firstly, download the link for SD Card files for kess/ktag:
https://mega.nz/file/H4MCBLRS#VT2Yiek1LlbaqUl4hY6A8JIL7L2VaHxKPu6CGano90M
or from this link:
https://nitro.download/view/F0ADFBE64345EF8/SD_Card_files_for_kess_ktag_7.020.zip
- Easy way to update:
Just format sd to fat32 put into device, move files into update folder ((C:/Program Files/Ksuite223/Update/) of ksuite and run Ksuite.
For Ktag you need power supply connected!
You don”t have to change CID. Any sd card you use will work fine. Tested by my self
Ktag details:https://www.uobdii.com/wholesale/ktag-v7020-red-pcb-eu-online-version.html
