ECU programmer allows to read and program the whole ECU unit of eprom file (or ROM memory with maps if eprom physically not present). The ECU flasher we supply include MPPS, Xprog-M, KWP2000+, Galletto 1260, BDM100 ,Kess V2,Ktag,SKP900 and more.
Ktag fw7.020 sw 2.25 is verified working great, it has an improved onscreen message management, it can read the gearbox sensor on Magneti Marelli 8GMK ECUs.
(21-12-2018) Good to know: The latest Ksuite 2.25 is verified to work perfectly with Ktag firmware 7.020, no issues of ECU read/write. Have been tested successfully on an ECU ME 9.7 from Mercedes-Benz W203 2003.
This article UOBD2 will show you a step-by-step guide on how to use KAG to read/write Mercedes Benz ME9.7.And try this procedures at your own risk! […]
For a auto repair mechanic,it is necessary to get the skill of restore Benz ECU data from original to a new replacement.
I should say KESS V2 V5.017 + KTAG V7.020 + ECM TITANIUM are good match, no one tool is perfect, but if one ECU tunner has all of them the tunning work will be more easier.
Kess is mostly for working over the OBD Port in the Car. For newer cars from 2011 with EDC17/MED17… ECU they archieved the Virtual Reading, so you have to make ID of ECU and get the ORI File from Alientech (not for clones!) or from your Tuner.
Post provides Winols 2.24 free download source & install, then making checksums tutorial
Carprog Chinese clone actually can do many things, almost as original, if it is reworked well such as read security codes or read flash
Kess V2 V5.017 is a kind of engine ECU and transmission programmer tool which can write back original or modified file in the vehicle ECU vie […]
Let’s start with the below comparison image between KTAG V7.020 and KTM100 V7.003 ECU programmer.
I Share High Quality Pic from Kess V2 which Components need change with GOOD EU components.
On the Pic you can see Text which Component is market with the name of the component!
NEW K-Suite 2.47 for Kess 5.017 adds exactly 7400 vehicles.
As an electrician more than 20 years I know what work or not with original and clone devices. My budget is not unlimited, so like […]
Free download Carprog software V5 V7 v8 v9 v10 for airbag reset
Yesterday,one of UOBD2 regular customers sent email to our engineers about carprog v8.21 “CRC32 Check failed” error.Here UOBD2 engineers share the solution,hope it will help to solve your problem.
New EM9.7 ECU is used to replace the old ECU if broken.
To the users of KTAG, KESS , KTM and Dimsport Trasdata:uobdii.com is available with a full set of BDM adapters (22 pieces in total). ECU tunner will very happy with this.
Copyright © 2025 | WordPress Theme by MH Themes
