Yanhua Mini ACDP with Module16 Benz Gearbox VGS2 NAG2 Refresh Tutorials

Mini ACDP with Yanhua Module16 Benz C Class Gearbox VGS2 NAG2 Refresh Tutorials.

Introduction: Yanhua Mini ACDP Module16 Benz Gearbox Renew and Refresh

Support cloning Mercedes-Benz (VGS-FDCT/ VGS2-FDCT) dual-clutch gearbox.
Support cloning Mercedes-Benz 722.8 (VGS2-FCVT) gearbox.
Support Mercedes-Benz 722.9 the second generation (VGS2-NAG2) gearbox refresh.
Support Mercedes-Benz 722.9 the third generation (VGS3-NAG2) gearbox refresh.

Detail Steps:

Please Confirm whether the gearbox module model is correct.

Step 1. Please prepare ACDP, OBP+ICP adapter,interface board and gearbox.

Step 2. Connect the interface board correctly to the gearbox interface as shown.

Step 3. Short the CAN resistor on the OBP+ICP adapter to the “CAN-R Join”.

Step 4. Connect ACDP, OBP+ICP adapter, interface board and gearbox.

After Connection, Open MINI ACDP APP, Choose Benz – Gearbox clone/refresh – C Class- VGS2 NAG2 – Refresh and follow continue steps

Check personalized and activated are YES. That means the gearbox has no been refreshed.

Confirm the system information and click Continue. As the below picture is the system information file storage path.

Choose Automatic calculation erase password and continue to erase data

After Erasing, Click Identify, make sure personalized and activated are No. That means the gearbox data has been erased. Click OK.

Identify system information finish and file backup,Work Done.

Video Guide:

Share