Xhorse Dolphin key cutting machine reviews: good and bad

Users experience of Xhorse Dolphin key cutting machine: reviews good and bad.


Xhorse Dolphin good reviews:

DK Veteran review 1: 

The only thing why I bought the Dolphin was the good experience what I heard about it. And the fact, that IT can work perfectly from its own battery. (Neither Miracle or the X6 does that)
My experience shows me that you need át least 2 intelligent key cutters, one for the car, one for the shop. The third is only needed when something happens with one of the others – makes sense tó have a second (spare) one what can work from 12v too.


DK Veteran review 2:

We cut a blade for an E46 between, decoding and cut without error msg, looks a bit different like the one what the Miracle made, but works. The HU92 is better, you can pull it out from the lock.

Have cut a HON66 too, but IT seemed tó be correct, just didn’t had any lock for trying.


DK Veteran review 3:

Recently purchased Dolphin to be able to do new KIA blade, as viper / 994 laser didn’t have it in database, been using it as my main machine for a couple month now, struggled with a va2 2nd use, re-calibrated it and since then all keys ive cut have worked 1st time with finish machining turned on. HU66 VA2 HU100 HON66 ect. For the price it cost, its not that bad


DK Veteran review 4:

Silca KIA9 is available on the 994 (card 1418)

I’ve had my Dolphin for a couple of months now with no real problems, not bothered to try VA2, I just cut them manually.
Very easy to transport around with built in battery.
You get what you pay for, you can’t compare it like for like, with a machine that costs 4-6 times more.
It doesn’t cut to code, that’s reflected in the price, so subscribe to Instacode, its only about £8.00 a month.


Bobb Keil review:

The dolphin cuts high Security, standard security, and tibbe akl it will duplicate single sided. The xhorse cutting tools are designed for Automotive keys. Dm me if you have questions I have the mini and the dolphin

Carlton Quay review:

mini has its own screen and the dolphin runs from your phone or tablet


Jason Henkle review:

I’ve cut eight keys and I’m down to about 85% last I remember and I charged it on Tuesday when I got it. I think it was rated for more than 25 on a full charge. It weighs a decent amount and I’m still thinking of a way to bolt down. I’ve only had a Framon for over 12 years so this this is a luxury!


Ameer Hasan review:

nothing to worry about there is a tech support also its a good machine i got it couple months ago its a fantastic machine worth of money


Martyn Clinton review:

I got a condor and a dolphin

Both are ok

Condor has less glitches

Both have shit names

I mean


A future vs a ninja vs a dolphin!!!


RonandJennifer Walker review:

I love mine. Does have a little learning curve. It is a trashy little thing though. I used a SEC-9 mounting bracket, had to drill a couple holes but works great. The SEC-9 DC converter plugs right in and works great.


Akos Subecz review:

Nice to have it on job site, but if you want to use it daily, it will be your worst nightmare. 3x slower than other machines because the small motor, so you cut 2 times less keys as with other machine. More difficult to change tracer and cutter because smaller spaces, the jaw you need to change with allen key not with fast release handle. And probably you use the phone app, you get a call as you try to cut, takes extra time, so for first machine i dont recommend, for a backup and carry on i recommend it highly.


Akos Subecz review:

I have a Condor Mini as a main machine, it works really good for me. Of course i have manual cutters as well.


David Sánchez M review:

the best!!


Bobb Keil review:

I love Xhorse Dolphin. I’m testing it before it goes out on it’s own. So far it’s pretty well built and cuts great


Adam Goldhawk review:

I have it and I like it no problems here


Hsen review:

Condor XC-Dolphin is an entry-level product of the CONDOR CNC machine family. The body design is simple, it is very suitable for mobile use in the mobile scene, without an operating screen, you need to connect a mobile phone or tablet, and install a dedicated APN.


Ruslan Yanchevskiy review:

Finally I got my Xhorse Dolphin machine here. Looks and works good so far. Now my XC-mini got sister and Xhorse family is growing


My XC-mini doesn’t like the cold, you need to use the hair dryer to lubrication the lubrication. This one works without a problem.


“vedro c boltami” works great in offline mode. But to connect to this pour, you have to go to the “location” on your device, otherwise you can’t connect it. It’s all the same as the internet of all key lost, to cut the key on the code.


Bad reviews:

1.Must agree Xhorse Dolphin machine really bad with va2 and va6 keys. X6 V8 cut perfect.

OMG, I’m cut more better on my china manual Defu 998 and va2t tool.


All right!

You can go to the app of xhorse and in there you can find our customer service , xhorse people will solve your issue.


Xhorse Dolphin machine tech support: www.uobdii.com