In this instruction,UOBD2 want to show you how to use VVDI MB tool to program new keys for Mercedes Benz W204 W207 all key lost.
Run VVDI MB Software,and select “EIS Tool”
Chassis “Auto Detect (CAN)”
Click “Read EIS data”
Select “Save EIS data” to save the EIS data on your PC
Select “Password Calculation”
Select this if lost all working key
Then select “W172,W204,W207”
Select “Data Acquisition”
Then it will prompt you with below massage
Warning:
1.This operation need about 2.5 hours.
2.Connect EIS with correct cable before contiue
3.Don’t connect ESL to cable
Click “Yes” to continue
Connect EIS with correct cable on the bench,don’t connect ESL
Connect “device OBD line” to cable OBD head.
Attention:Not car OBD
Press OK after confirm
Connect “IR adapter” to VVDI MB Tool
Please connect VVDI MB BGA Tool,EIS and emulator key as blow show
Press OK,now it will cost you about 2.5 hours
After then completing,please save the data on your PC
Acquistion finished,upload the saved data with “Upload Data” for password,click “OK” to continue
Select the data you save just now
Upload success.Queue number:1,require about 1 minutes to finish
Wait about 1 minute,the press “Query result”
Copy “Key Password”
Back to “EIS Tool” and click “Read EIS data”
Paste the key password
Save EIS data
Press “OK” to save HC05 formal file
Select “Prepare Key File” and click Load EIS file
Select the data file you save just to upload
Select “Key 4” and “v051”,then click “Prepare Key file”
Now save the key file
Then click “Load Key file” to load key file you save
Click “Write” button to start writing key
Now click “Identification key” again to check
The key data file have been wrote into key,then back to “EIS Tool”
Click “Read EIS data”
Now use the new key to turn ignition on and off several time
Read EIS data again
Key 4 is activated done!
Done!
http://www.uobdii.com/wholesale/xhorse-vvdi-mb-bga-tool.html
