Toyota TOY40 Key Cutting by Xhorse Dolphin XP-005L

Question: Which Key Cutting Machine to Cut Toyota TOY40 emergency key?
Answer: Xhorse Key Cutting Machine is good choice. We can use Xhorse Condor XC Mini Plus and Xhorse Dolphin XP005 use M2 clamp and  we also need a bar adapter for the thin key which is only 1.5mm.We also can use the new Xhorse Dolphin XP005L which equiped with M5 clamp and no need more adapters.

Here is steps to decode and cut key on TOY40 one side key by Xhorse Dolphin XP-005L

Turn on Dolphin XP005L key cutting machine

Tap vehicle database>> Asia>> Toyota>> TOY40 emergency key (one side key)

M5 clamp side B tip align 2nd position

Universal M5 can rotate clamp side A to side B easily.

Put the original key on clamp tip align 2nd position

Press ‘Decode key’ to start decode process

After decoding key successfully, put the new blank key on the M5 clamp and press ‘Cut key’

Make sure you have selected cutter diameter: 1.5mm

Tap System>> machine parameter>> cutting setting>> cutter diameter: 1.5mm>> Save

Install 1.5mm cutter to the top limited position, then tighten

Press ‘Cut’ and wait a moment till the process is completed

More Xhorse XP-005L: https://www.uobdii.com/wholesale/xhorse-dolphin-xp005l-key-cutting-machine.html

 

Share