(Solved) Kess v2 error “External exception EEFFACE

I replaced chip and reset tokens, then get connection error “External exception EEFFACE” as following picture shows.
Try follow steps:

1.If you connect to internet with this clone tool,or make online update .The interface is destroy/broken

1.–Buy a new NPX chip with 60 tokens inside. Desolder the old NPX and change it with new.It cost 14-20USD, some users call this chip as CPU Repair Chip, available at: http://www.uobdii.com/wholesale/kess-v2-cpu-repair-chip.html . Note: NPX is out of stock in some sites now, because the newest KESS V2 need not replace NPX, the NPX is preinstalled in the machine .
2.–or you have to weld a connector on backside of interface ,and plug the J-link programmer.
You can reset the Kess v2 to virgin. UOBDII.COM is available with J-link V8, cost about 20USD, user can buy at:
http://www.uobdii.com/wholesale/j-link-jlink-v8-arm-usb-jtag-adapter-emulator.html . Note: the newest KESS V2 V2.06 is packed with J-link V8 programmer, no need buy additional one.
Details about j-link v8 solve Kess V2 master tokens limited problem:
Step 1. Buy one LPC2478 chip to replace the original one for KESS V2 master.

Step 2. Prepare for a LINK J-LINK V8 ARM USB-JTAG Adapter Emulator.
Step 3: weld a connector on backside of interface.
kess V2 PCB
Step 4: plug the J-link programmer
kess V2 PCB_1

Also you can watch video in kess v2 master package to program the chip.

I hope it can solve your problem.

Our customers feedback some problem about kess v2,we sovled it and have written below,if you have same problems,it will help you.

How to solve KESS V2 Wake up error?

Working Solution for Ktag clone Kess v2 checksum error

KESS V2 not works with k-line or does not work well?

KESS V2 WARNING: the tool is not updated