Scania SDP3 2.40.1 free download, Win7 setup and free activation

Scania SDP3 2.40.1 is finally tested working fine to diagnose and program by working together with Scania VCI3 cable, this article is available with Scania SDP3 2.40.1 free download source, Win7 setup procedure and free activation procedure etc.

Scania SDP3 2.40.1 free download

https://share.weiyun.com/5RRyFLs

pass: c1ev49

Mega link is coming soon.

Uploaded by uobdii.com engineer.

Works with Scania VCI3.

 

Scania SDP3 2.40.1 installation and run with Scania VCI3:

OS: WIN7 (Windows 8 is working too, try win10 at your own lucky)

 

  1. Install “Adobe Reader 9.2”.

 

  1. Install “.network Framework 4.6.2”.

 

  1. Open “Local Disk (D:)” -> “Scania Diagnos & Programmer 3 2.40.1”.

Install sdp3 2.40.1 and succeed.

 

  1. Right click on “Prerequisite”, choose “Run as administrator”.

 

  1. Reboot the computer.

 

  1. Check your computer operation system, here is 32bit.

Enter “Local Disk (D:)” -> “KeyGenandFIX” -> “X32” -“Install”.

Install this driver software anyway.

Have message “Installing device driver software” at the bottom of the desktop.

 

  1. How to active Scania SDP3 2.40.1

Copy the HWID and provide it to the dealer to active.

After the dealer helps register, right click on “Registry Editor” and choose “Merge”, then “Yes”.

 

  1. Enter “Local Disk (D:)” -> “KeyGenandFIX”.

Copy both of the .dat and .dll files.

On the desktop, right click on “SDP3” and choose “Properties”, then “Open file Location”, right click “Paste” (Paste the above two.dat and .dll files to replace the existing ones).

 

  1. Click on “Time”, then “Crack”, then “OK” after finishing.

 

  1. Reboot the computer.

 

  1. On the desktop, click on “SDP3 configuration”, choose the language you desire. Scania SDP3 2.40.1 language is multi-choice.

English, German, Spanish, French, Japanese, Dutch, Persian, Polish, Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian, Chinese. etc.

 

  1. On the desktop, click on ” SDP3″.

 

  1. Read the warning and click on “Yes” to agree.

 

  1. It’s up to you to click on what you want to do, read and clear trouble codes, read freeze frame, live data or adjusting customer parameters, calibrations, conversions affecting the electrical system and updating software in control units. Scania SDP3 2.40.1 can access to any of Scania industrial and marine engines with electrical system with CAN communication.

 

Please enjoy.