Opcom firmware V1.95 with new program 2014V Vaux-com 120309A is newly verified working more stable than opcom V1.7 & opcom V1.65, and is 2 dollars more expensive.
Attach Opcom firmware V1.95 PCB:
To compare with Opcom firmware V1.7 PCB (single layer):
To compare with Opcom firmware V1.65 PCB (Dual layer):
Compare opcom firmware V1.95, opcom V1.7, opcom 1.65, opcom 1.59 and opcom 1.45
Actually, all versions of opcom mainly differ from each other in the PCB design and the program. The other aspects are the same.
- Price: $18- $23
opcom firmware V1.95 is the most expensive. And the lower firmware version, the cheaper the price.
- VAUX-COM Software: the Same
VAUX-COM_120309a is compatible with opcom firmware 1.95, opcom firmware V1.7, opcom 1.65, opcom 1.59 and opcom 1.45.
In another word, all versions of opcom perform the same function: read out and clear fault codes, read live data and perform output test. Also, print out, save, or copy the fault codes to any other application. And measure block information on many control modules & show 8 measuring block parameter simultaneously.
(Crack, No pass, No need to active, No virus)
- Operation system: the Same
XP & windows7
1) dotnetfx35_SP1 patch must be installed on Win 7, otherwise the software will not run properly
2) Open software as Administrator; check the installation video in CD first
- Unable to Update firmware: The Same
opcom crack can’t update online, otherwise it will be damaged.
- No need active: The same
- Workable Opel models: the same
opcom is compatible with almost all Opel cars, incl. new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
- Workable control units: The same
Works on many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, etc.
Hope this helps.