Lonsdor K518 Smart Key Programming for Chevrolet IMPALA 2014

Here comes a guide on how to use Lonsdor K518ISE programmer to perform smart key programming for Chevrolet IMPALA 2014.

Procedures:

Connect Lonsdor K518 to vehicle and enter the immobilization menu to select “Chevrolet” brand

Select “Cruze”

Select “-2016”

Select “Smart Key”

Select “Add smart key”

Please turn on the ignition switch (do not press the brakes,hold down the start button for about 8 seconds till the dashboard is fully lit),[OK] to continue

Insert the smart key to be programmed into the key slot,take the others out of car,the slot position generally lies in:

1.Inside the arm hand

2 .Under the cup

3.Next to the ashtray

4.In the hand box

Press [OK] to continue

Current key count:3

Press [OK] to continue,it will prompt you “Communication connecting,please wait…”

Enter the PIN code:2782 we read before,and then press [OK] to continue

Configuring system,about 10 minutes,please wait…

After the process completing,press the start button twice within 5 seconds wait for 2 seconds each time,click [OK] to continue

Then Lonsdor K518 prompt “Program successful,continue to program the next one?’

Hold down the start button for 10 seconds

Release the start button and wait for 5 seconds

Press and hold the start button until the dashboard lits (if not lit,press and hold the start button for about 15 second),then release,click [OK] to continue