LAUNCH’s brand-new X431 IMMO Pad provide an one-stop solution for vehicle diagnostic and anti-theft matching. It not only provides advanced diagnostic functions, but also key matching, password reading and immobilizer replacement functions for locksmiths, which covers main European, American and Asian makes, such as Mercedes-Benz, BMW, VW/Audi, Porsche, Peugeot Citroen, Ford, GM, Honda, Toyota, Hyundai, Kia, etc. Meanwhile, it supports 170+ Bosch’s, 10+ Siemens’s engine ECU and 18+ gearbox ECU BENCH mode clone. Pre-scan and post-scan report of diagnostic function helps locksmiths and workshop to show comparison of vehicle health status to customer clearly.
Launch X-431 IMMO PAD is based on the Android 7.1 platform and is equipped with an octa-core 2.0GHz processor, 4GB of memory and 64GB of storage. Its 10.1-inch full-fitting sunlight-readable Gorilla Glass screen boasts a vibrant 1920 x 1200 resolution. The tablet is IP65-rated water- and dust-resistant, with a dual-band Wi-Fi architecture providing a more reliable tool-to-VCI connection. The upgraded all-in-one Smartlink VCI supports CAN, CANFD, DoIP, J2534, D-PDU, RP1210 and Smartlink remote service, which enables the capability of ECU coding and programming that are required usually after immobilizer replacement.The upgraded Launch X-Prog 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code.
Launch X431 IMMO PAD Diagnostic Function:
1. All systems OE-Level diagnostics for over 110 vehicle models.
2. Exceptional full functionality includes comprehensive OBD II diagnostics, bi-directional control, ECU coding & programming, etc.
3. Support CAN/CANFD/DoIP communication protocols and J2534/D-PDU/RP1210 communication standards.
4. Exclusive Smartlink remote diagnosis.
5. 25 advanced service functions.
6. Pre-scan and post-scan diagnostic report.
7. Expand diagnostic coverage via “Mall”.
8. Optional ADAS calibration function with the X-431 ADAS calibration tools.
9. Optional TPMS function with X-431 TSGUN.
Launch X431 IMMO PAD Key Programming Function:
1. Supports key matching/copying, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Anti-theft modules replacement
Support anti-theft modules replacement of BMW, Mercedes-Benz, VW/Audi, Honda, Nissan, Hyundai, Kia, BYD, Changan, Wuling Baojun, GAC, SAIC Maxus, Great Wall Motor, Chery Car, Dongfeng Fengxing, JAC Passenger Car, etc
3. Anti-theft password reading
Supports the anti-theft password reading of Peugeot Citroen, GM, Nissan, Hyundai, Kia, Chery Cars, Dongfeng Fengxing, JAC Passenger Cars, etc.
4. Key Matching
Support key matching of Ford, GM, Mercedes-Benz, BMW, VW/Audi, Porsche, Peugeot Citroen, Land Rover Jaguar, Honda, Toyota, Nissan, Hyundai, Kia, BYD, Changan Automobile, Wuling Baojun, Great Wall Motors, Chery Cars, JAC Passenger Cars, etc
Launch X431 IMMO PAD Advantages:
1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for fifth-generation Audi (0AW/0B5) gearboxs.
4. Supports reading, writing & cloning of the ECU for fourth-generation VW UDS engines.
5. Supports BMW E chassis 8HP gearbox ECU program wiping.
6. Support Mercedes(Engine, Gearbox, EIS) and BMW(Gearbox) ECU anti-theft data erase.
7. Supports 170+ Bosch, 10+ Siemens engine ECU and 18+ gearbox ECU BENCH mode clone.
– Bosch engine ECU: ME17，MED17，EDC17，MEVD17, etc.
– Siemens engine ECU: BMW(MSV90, MSD87, MSD85,MSD81, MSD80), Mercedes(SIM271DE2.0,SIM271KE2.0), VW/Audi(SIMOS8.6x,SIMOS8.5x,SIMOS8.4x), etc.
– Gearbox ECU: DQ200-MQB, DQ250XX, DL501 Gen1,VL381,VGS2- FCVT,VGS-FDCT,DQ400E,DL501 Gen2,DL382-7F,VGS2-FDCT,9G_Tronic,DQ380,DQ381, DQ500,AL551,AL450,AL552,AL951,8HPXX, etc.