How to make a Benz W207 new key by Autel MaxiIM IM608 all-in-one auto key programmer, here is the tutorials with detail steps.
Device Preparation:
Autel MaxiIM IM608 Pro, VVDI Be Key Pro Yellow Version.
Steps:
Install VVDI BE Key Pro Yellow PCB with the 3 button key shell
Connect Autel IM608 Pro to the vehicle properly
Insert the Xhorse VVDI BE Key Pro into EIS to test, doesn’t work
Go to IM608 tablet
Tap IMMO>> Accept the disclaim>> Mercedes- Benz>> Automatic selection
Read VIN automatically
Confirm the vehicle info
Tap 2008-2014>> Hot function>> Add key (guided)>> On bench>> Auto scan
Detect the current EIS type is W207
Follow the on-screen instruction to perform key adding:
- Read EIS data
- Read ignition key information
Insert the ignition key into the IR keyhole on the Autel IM608 Pro programmer
This ignition key is a smart key, press Yes to continue
Confirm the IMMO status (the existing keys number is 4 and key is smart key)
- Read blank key information
Put the VVDI BE Key Pro close to the IM608 programmer remote reception position and press any button of the key
Insert this blank key into the IR keyhole on the programmer
- Obtain key password
There is not a key password, press OK to enter password calculation process
Insert the ignition key into the EIS and wait for 5s
Pull the ignition key out
Insert the ignition key into the EIS and wait for 2s
After pulling the ignition key out, insert it into the IR keyhole on the programmer
Collecting data and calculating password
Calculate password successfully
Insert the ignition key into the EIS and wait for 30s
Password calculation is completed
- Generate key file
Insert the blank key into the IM608 Pro programmer IR keyhole
Detecting key
- Write BE Key file
Key addition is completed
- Test if new key works normally
The test result is the Xhorse VVDI BE Key Pro yellow PCB added Benz key successfully with Autel IM608 Pro key programmer.
Video Guide:
