Clone platinum DSG DQ200 DQ250 MQB with ktmflash and kess v2 original

Question: want to clone platinum dsg (ECU type: DQ200 MBQ, DQ250 MBQ). I want to read out and save the ECU data, then flash the data into one second hand ECU that is dismantled, any cost effective ECU programmer to recommend?

Answer: China ktmflash + one VAG Audi Gearbox Adapter is the cost effective programmer for cloning DQ250 DQ200; and kess v2 original is also the solution of cloning DQ250 DQ200.

  1. How to use China ktmflashto clone platinum DSG DQ200 DQ250 MQB?

Need:

China ktmflash + one extra VAG Audi Gearbox Adapter

ktmflash-clone-platinum-dsg-dq200-dq250-mqb-01

IMG 1: China ktmflash

ktmflash-clone-platinum-dsg-dq200-dq250-mqb-02

IMG 2: VAG Audi Gearbox Adapter

With this cable, ktmflash can clone DQ250 DQ200 VL381 VL300 DQ500 DL501 etc.

VAG Audi Gearbox Adapter wiring diagram:

Shows how to connect KTMflash, Gearbox Adapter, the PC and VAG car: 

ktmflash-clone-platinum-dsg-dq200-dq250-mqb-03 ktmflash-clone-platinum-dsg-dq200-dq250-mqb-04 ktmflash-clone-platinum-dsg-dq200-dq250-mqb-05

DQ250 / DQ200 are listed in the KTMflash vag car/ecu list:
VAG: DQ200 (0AM)
VAG: DQ200MQB/G2 (0CW)
VAG: DQ250C (02E) K-Line
VAG: DQ250E/F (02E)
VAG: DQ250MQB (0D9)
VAG: VL300/V30 (01J/0AN) K-Line
VAG: VL300/V30 (01J/0AN)
VAG: VL381 (0AW)
VAG: DQ500 (0BH/0BT)
VAG: DL501/G2 (0B5)
VAG: DQ200/MQB Boot (MICRO)
VAG: DQ200/MQB Boot (EEPROM)
VAG: DQ200G2 Boot (MICRO)
VAG: DQ200G2 Boot (EEPROM)
VAG: DQ250E/F/MQB Boot (MICRO)
VAG: DQ250E/F/MQB Boot (EEPROM)
VAG: VL300/V30 BSL (FLASH)
VAG: VL300/V30 BSL (EEPROM)
VAG: VL381 Boot (MICRO)
VAG: VL381 Boot (EEPROM)
VAG: DL501 Boot (MICRO)
VAG: DL501 Boot (EEPROM)
VAG: DL501G2 Boot (MICRO)
VAG: DL501G2 Boot (EEPROM)

ktmflash-clone-platinum-dsg-dq200-dq250-mqb-06 ktmflash-clone-platinum-dsg-dq200-dq250-mqb-07

  1. Original Kess V2 clone VAG DSG DQ250 and DSG DQ250 MQB.

Note: not china or eu clone

MQB Platform Cars including 2015+ Golf and A3: Select KESSv2 Family 615. You may need a newer DSG cable (released later 2019 or early 2020) with a switch in it.

The following PDF guide is old, but kept here for those who would like something printable:

Firstly set up the DSG Flashing Software in 50 minutes, then to read and write DSG.

In KSUITE/KESSv2 software on your computer, select VOLKSWAGEN > GOLF IV (5K) > TEMIC DQ250

GEARBOX (Family 412)

It does not matter what engine type you choose, as long as you select Family 412.

vag-dsg-dq200-dq250-mqb-cloner-08

Select READING and then follow instructions on screen.

vag-dsg-dq200-dq250-mqb-cloner-09

……

For more details, please google search ” kess DSG DQ250″ and have KESSv2 DSG PDF Guide.

Good luck!

Share