Autel MaxiIM IM608 Pro Review: Ultimate All-in-One Key Programming Tool

Autel MaxiIM IM608 Pro is the most advanced and smart key programming tool . Compare to Autel im608, Autel im608 pro has great improvement in hardware and software. IM608 pro adds unlock key 11 key types(for Audi/BMW), supports read/write EEPROM/ engine ECU/MCU, read/write key chip/Mercedes Infrared Key etc. Besides, it has the same diagnostic level as Autel MK908/MK906BT/MS906BT. 

Autel IM608 Pro come with XP400 Pro which is an advanced All-in-One key programmer. Pros of XP400 Pro:1.NO misconnection burnout 2. More stable of read/write key 3.Extended IMMO functions on BMW/BENZ and Audi etc. It supports Data Read/Write of 3,000 Plus Types. XP400 Pro will read PIN, key learning remote learning, key generation, IMMO ECU reset/adaptation/refresh/coding, IMMO data backup. This bundle is the most cost-effective choice for workshops and Locksmith. 

Autel IM608 Pro diagnostic tool can perform advanced ECU Coding same as Autel Elite/ Elite 2/ MS908S PRO/ MS908/ MK908/ MK908P/ MK906BT/ MS906BT. ECU Coding function enable you to disable the automatic Start-Stop, customize the daytime running lights, and set the speed to show in the digital display below the speedometer, tuning the ignition time ,tuning the oil injection, flash hidden function, and so on. You need to input the data manually.

Autel IM608 Pro bidirectional control scanner can perform Active Tests to request information or command an actuator to perform specific tests, such as turning the fuel pump on and off, cycling the a/c clutch on and off, performing an evaporative emissions leak test, fast troubleshooting your vehicle defective parts and components, not simply by reading codes. P

Autel IM608 Pro auto key fob can perform 30+ service functions such as Oil Reset, ABS Bleed, SRS, SAS, D-P-F, EPB, Battery Registration, Brake Reset, Injector Coding, Key Fob Coding, fully meeting your needs. IM608 Pro automotive diagnostic scanner with OE-Level all systems diagnosis same as Autel MS906TS/DS808(K)/MS906/MP808(K)/MP808BT/MP808TS. It can access all available vehicle modules for more than 80 US, Asian and European makes and models.

The Autel IM608 Pro diagnostic scanner has been upgraded to be able to fully access protected FCA vehicles! Autel IM608 Pro is compatible with 2017 & later FCA cars (Chrysler, Dodge, Jeep, Alfa Romeo, Fiat, etc.) to perform full systems diagnostics codes, bi-directional control, and active tests, ECU Coding, even more. 

You will never walk/work alone. We would be honored if we could have you come on board. Alone with a 2-year free update, 1-year warranty, and lifetime technical support, IM608 pro will be the great key programming scan tool you’ve ever had. NOTE: From August 1, 2022, purchased and registered IM608 Pro comes with two years of free updates.

Shop Now: 

Autel IM608 Pro: https://www.uobdii.com/wholesale/autel-maxiim-im608-pro.html
Autel IM608 Pro with APB112,Gbox2: https://www.uobdii.com/wholesale/autel-maxiim-im608pro-plus-apb112-and-gbox2.html
Autel IM608 Pro Full Version (wtih IMKPA,AP112,Gbox2): https://www.uobdii.com/wholesale/autel-maxiim-im608pro-plus-imkpa-gbox2-and-apb112.html

Share