Good to know: This is a full Switching between the two devices (C4) and (C3) so that people can use only one laptop with the devices
Question: Looks easy to swap out the BCM. Not sure if I need to program it so the keys and everything works. Reading conflicting info
uobdii.com engineer make a clarification of the relationship of MB SD C4, C5, C6, OEM C6, Ecom DOIP, C5 DOIP etc, aiming to help the
I lost my sd card on my 5.017 kess v2 china please anyone could help me? Here you can download for free: https://mega.nz/#!7JtUxS4A!1lC6ng80bWO7OlNzaD8qTtPmSmHJo6Exj6CJcDj7BLg Password:
Here UOBD2 show the VXDIAG oem C6 Doip software registration and firmware update guide,hoep it helps! 1.2019.12 Xentry and DAS do not need to be
Xhorse VVDI BMW is the best mileage programmer for old and new BMW. This article is available with Xhorse VVDI BMW KM reset function list
Here, we’ll talk about the difference between XP-005 and XP-007 Xhorse dolphin key cutting machines.
Offer free ksuite 2.53 for kess 5.017 China clone, it doesn’t work with Ktag clone yet.
RDC Module need coding when replaced. Fact is, it does need to be set to the car and can be done with NCSexpert and Inpa
To have Russian language, please download and install the following Autek Ikey 820 Update Tool V1.6(Russian):
Can OBDSTAR X300 DP Plus add new key on VW Polo 2017 NEC35XX(MQB) Dashboard?Can OBDSTAR X300 DP Plus add new key on MQB remote key for Vw Polo 2017 NEC35XX(MQB) 2014.06 Dashboard?
2002 VW Jetta 1.8L original PCM was faulty.“In-circuit” Eeprom programmed a donor PCM ST95040 Eeprom with the Autel IM600 and new and improved XP400 = Success
3 steps to reset Porsche piwis3 software to operating mode E (Engineering), so that the engineer can perform advanced job including programming, power upgrade, retrofit
Problem: When I used Yanhua acdp to clear 8hp 45 isn, I got prompt “EGS version does not support”. uobdii.com engineer replied: Please
Example: to change the trans fluid on this car (I don’t believe that any automotive fluid is really “lifetime”) you have to complete the final fill at a certain operating temp range – this tool will give you real time data.
Copyright © 2020 |
UOBD2 Official Blog
error: Content is protected !!