Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
PSA Diagbox 7.83 Setup Downlaod:
Below link to get Lexia 3,it is test work 100%
And Here is the newest Diagbox V9.12:
Install Diagbox V7.83 for Lexia 3 PP2000 on VirtualBox or VMplayer:
a) Ensure that the Hard Disk controller is set to IDE not SCSI.
b) Create a preferably fixed hard drive 20-36GB preferably contiguous, Dynamic also works. (Win XP needs less resource than Win 10)
c) Connect the Windows ISO through the Settings -> Storage menu.
d) Install VirtualBox Guest Additions or VMWare Tools after installing Windows.
Install Diagbox V7.83 for Lexia 3 PP2000 on Windows:
a) Microsoft .NET 3.5 SP1 Framework (needed for Diagbox 7.60+)
b) All necessary drivers (usually covered by the Guest Additions/VMWare Tools)
c) Setup a network adapter (does not need to be connected to network)
d) Mozilla Firefox
f) Virtual CloneDrive (not needed for Virtual Machines)
1.Start only as Administrator and without internet, for those who are running later Windows like 10, XP SP3 compatibility is also required.
2.Ensure that .NET Framework 3.5 is installed
3.Systems: Windows (32 bit only) XP, 7, 8, 10
Lexia 3 Customer Questions & Answers:
Question: does this work on a citreon c4 grand picasso
Answer: I used it on a Peugeot 307. I have found this reference on the Cardiagnosis website. “Q:Can I install it under Windows 7?Does it work for vecicle type Citroen C4 Picasso year 2008 ?
A: No,it must under Windows XP and close the virus software.It can work for Citroen C4 Picasso year 2008.But some function depends on the car model.”
If your car is an earlier model you probably have a better chance of full functionality.
Question: Will this work with windows vista, or do you need to find a copy of windows XP? Does this run on anything other than windows XP?
Answer: I couldn’t get it to work at all the encryption code to get it to work was wrong got my money back.
Question: does it work on peugot hdi 407
Answer: Hi Philip, I got it for my peugot 407 sw estate and it works perfect. Look in your centre consile (behind the hand brake) and there should be the connection in there for the PP2000 plug, if it is there then it will work. Just so you know installing the CD onto your computer/laptop can be a real pain, I am pretty computer literate and it still took me 3 goes to get it working properly, also it will only work with windows XP operating system so if you have a newer computer or laptop with windows 7 or higher it will not work.
UOBDII All rights reserved Free download Diagbox V7.83 for Lexia 3 PP2000 Peugeot Citroen Scanner