Xhorse dolphin xp-005 is a portable and powerful automatic key cutting machine, work with Xhorse APP, make key cutting easier. Here is the tutorials of Xhorse dolphin xp-005 key cutting .
1.Open Xhorse App >>Device Information >>Machine Calibration>>Height Level Adjustment of Cutter.
2.Install and tighten the clamp M1, do not put any key on the clamp .
3.Turn the cutter tightening wrench to fix the cutter and the probe, as shown in the picture of the app.
4.Click on “Continue”in Xhorse app to the step of height level adjustment.
5.Unscrew the probe tightening wrench, adjust it to the same level as the cutter, then turn the tightening wrench to fix the probe.
6.Click on “Continue”.
1.Clamp Calibration >>Clamp M1
2.Put a Hon66 key blank on the clamp M1, then turn the key tightening knob to fix it.
3.Click on “Continue”.
1.Clamp Calibration>>Clamp M2
2.Install clamp M2 (no key on the clamp) and rotate side A upward.
3.Rotate side B upward, click on “Continue”, calibration finished.
4.Rotate side C upward, click on “Continue”, calibration finished.
5.Rotate side D upward, click on “Continue”, calibration finished.
1.Rotate side A upward, put the original key on clamp M2 and tighten it.
2.Xhorse APP>>KeyDuplication>>Single Track External>>Top Align>>Clamp M2-A>>Key Learning
3.After one side of key learning, uninstall the original key and install a new key.
4.Key cutting continues…Key cutting finished.
5.Uninstall the new key and install the original key (unlearned side upward). Key learning…Key learning finished.
6.Uninstall the original key and install the new key (uncut side upward). Key cutting continues…Key cutting finished.
7.Uninstall the new key and verify it in your car.