VVDI MB BGA tool calculates password will cost tokens, this post write a detailed instructions on how to add the tokens after use up. Even you will get big surprise in the second paragraph.
!!!HOT NEWS!!! Two months unlimited tokens
From December 25th, 2017 to February 25th, 2018, Everyone who has VVDI MB TOOL will enjoy two months unlimited tokens, besides 99% success calculation rate within 20 seconds.
4 steps to add VVDI MB BGA tool tokens
Step 1: Buy tokens
Option 1: have condor xc-mini or cond XC-002, then you can bind it with your VVDI MB tool to get one-tine free token every day.
Step 2: Please provide VVDI MB Tool serial number when you place order.
Step 3: Wait for the tokens add, usually it will take 24hours to 48 hours.
Step 4: After the tokens adding successfully, start MB tool software, click “Password Calculation” and you can see tokens number, if it doesn’t add successfully, you can see 0 times for calculation.
The newest version VVDI MB TOOL V3.6.0 update make a great improvement in the password calculation success rate and time.
- Improve the success rate of BAG key password, erase password and enable key password
1) The server have 99% success rate for key password now (You can get key password for only 1 time calculation)
2) Reduce the key password calculate time, we only need about 20 seconds for 1 time calculation
3) The server have 99% success rate for erase password and enable key password now
4) Add some old version NEC key for password calculation
5) We will continue update our server to achieve good result for BAG key password, erase password and enable key password
To compare the time it cost you to calculation password in the past days in working key mode and lost all key mode.
WORKING KEY MODE NEED PAY 1 TIME FOR SUCCESS CALCULATION. LOST ALL KEY NEED PAY 2 TIMES
FOR SUCCESS CALCULATION
Password calculation – working key: can get key password through EIS and
working key (online)
CAN protocol EIS all support password calculation
Support BGA keys and other NEC keys
Support calculate password for NEC v51, v57 keys. No soldering, safe method.
Data acquisition time depends on the key version. It needs about 3.5 – 13 minutes
BGA version need about 5 minutes, some versions only need 3.5 minutes
Calculate time in server: 30 seconds – 1 minute
Password calculation – lost all key: support W166, W212, W246, W212(old with ELV)
EIS for password calculation while lost all working key
Lost all key data acquisition time depends on EIS type, It needs about 3.5-8 minutes
Lost all key calculate time in server: 30 seconds – 1 minute
Tech support supplied by www.uobdii.com