What is Moe Diatronik SRS+DASH+CALC+EPS OBD Tool?
The first tool which supports All Renesas and Infineon for airbag reset via OBD2, supports OBDII Diagnosis function and IMMO Functions.
√All Renesas and Infineon airbag restore by OBD2 up to 2018
√Dash mileage correction via OBD2;
√Airbag Calculator via USB;
√OBDII Diag, IMMO Tool
etc…
You can now remove crash data in car or on table via OBD by directly connecting to the pins on the SRS airbag module using CANL & CANH or KLINE.
Remove crash via OBD on table or in the car up to 2018+ models from the fallowing:
Nissan/infinity with Infineon MCU – up to 2018+ Automatically removes crash with one click
Toyota/Subaru with Renesas H8sx – Read/write full flash erase eeprom
Hyundai/KIA with Infineon/MAC – up to 2018+Automatically removes crash with one click
Mazda/Ford with Infineon/MAC Up t0 2018+ – Automatically removes crash with one click
READ/ERASE DTC – you can check and verify your work by seeing if Crash is stored in DTC
Honda/Acura MPC Auto clear/restore to Virgin dump
Hyundai Veloster/Accent 2016+ with NEC
Honda/Ford with R7F701x RH850 2016+ civic, pilot, ridgeline, fusion etc..
Honda Accord 2013+ with MPC/SPC 560x
Volvo
GM in black plastic housing
Comes with GprogLiteSL for you to read write by soldering points: All Renesas H8SX (1725,1797), Renesas RH850, NEC V850, SPC/MPC560x, Fujitsu.
What is Gprog Lite SL Adapter (ELS27)?
Works together with Diatronik SRS+DASH+CALC+EPS OBD Tool to perform:
√MCUs R7F7
√Renesas H8sx
√MPC/SPC560x
√NEC v850
All-in-one tool for all your programming needs:
Why need Moe Diatronik OBD Tool + Gprog Lite SL Adapter?
Only works together with Gprog Lite SL Adapter, can Diatronik OBD Tool can perform lots of functions.
Question: Do I need to buy any dump file or any other additional stuff or data base or online connection to do the fix?
Reply: no need to buy all are free online server.
How to use Moe Diatronik SRS+DASH+CALC+EPS OBD Tool?
1). Install Software.
2). Settings.
3). Update
4). Calc Tool.
5). Work for OBD Module
6). Work with SRS Toyota-Subaru
1) Install software procedure:
OS: Win7 & Win 10
Software Version: V2.0.0.11
Language: English & Russian
After receiving the security key, you turn to your software supplier and he sends you an archive with the program files and license.
Unpack the archive to any convenient folder on your computer, insert the security key into the USB and you can run the program.
Driver for OBD adapter can be downloaded here
http://els27.ru/files/PL2303_Prolific_DriverInstaller_v1_12_0.zip
Included with the program is a program ELS27Baudrate.exe
With her you can check and configure OBD2 adapter supplied,
please note that the speed of the adapter in this program, you need to set 2mb/s (2 000 000).
2). Settings
In the settings menu, select the COM PORT on our adapter, and close the window, when the window is closed, the program will create a ini file with the settings and remember the port number.
Button Select Prog Exe provides the flexibility of running third-party program programmer, to work with dumps.
3). Update online
Update the program online in the menu ‘ONLINE’.
The program checks for updates, and when available offers download.
Updates are stored in the root directory of the program in the Update folder, if this folder you do not, the program will create it automatically.
Updates come out about 1 every 1-2 weeks
4). CalcTool
Menu CalcTool you can work with dumps ECU SRS and ODO.
5). Work OBD Module.
If the module you are seeing this message, it means that the module is still being tested and will soon be available.
All modules have built-in assistance for connecting and working with the module for the call, click the INFO button.
6) Work SRS Toyota-Subaru SRS.
Work with blocks SRS TOYOTA – SUBARU is made in two stages, work mode and Boot Mode.
Work Mode.
In the work mode read and erase main flash memory and save it. Reading is possible both on the table and in the car.
Boot Mode.
In Boot Mode it is writing to flash and erasing EEPROM, the data about the accident.
For unit transfer in boot mode, you must erase the flash in operating mode, connect RESET PIN of MCU with +5 volts through a resistor of 4,7-10kOm.
After writing flash, the resistor must be removed.
Moe Diatronik operation:
1). H8SX SRS UART Repair
2) Diatronik DTR Toyota SRS 2016 Renesas read flash by OBDII.
3). Diatronik erase flash for Toyota Renesas H8SX successfully.
Words + images operation:
https://blog.uobdii.com/diatronik-reviews-h8sx-srs-uart-repair-toyota-renesas-etc-works/
Authorized dealer:
www.uobdii.com, you can email at Sales@UOBDII.com for instant information.
