OBDSTAR X300 DP Plus Program 2022 TOYOTA Corolla Cross 4A Proximity Key

How to use OBDSTAR X300 DP Plus (Key Master DP Plus) to program 2022 TOYOTA Corolla Cross 4A proximity key? It requires both TOYOTA-30 Cable and Key SIM to work together (no need pincode) and make sure the internet connection is normal during the operation as well.

Prepare all devices below:

  • OBDSTAR TOYOTA-30 Cable
  • OBDSTAR Key SIM5 in 1 simulator
  • OBDSTAR X300 DP Plus C Package Full Version
  • Main Cable
  • 2022 TOYOTA Corolla Cross

NOTE:

This OBDSTAR Toyota 30 cable also can be used for OBDSTAR X300 PRO4 (Key Master 5), Autel IM508, IM508S, IM608 Pro, IM608 II, and AVDI.

With this cable, there is no need to pierce, hook, or plug and unplug harness during operation, and there is no risk of damaging communication cables!

Operation:

Use the TOYOTA- 30PIN connector to connect the vehicle proximity key and OBD interface

Tap “DP” on the main menu of X300 DP Plus tablet

Select CAR IMMO>> All>> TOYOTA LEXUS SCION >> TOYOTA LEXUS SCION V32.82>> Manual Select Model>> TOYOTA>> ASIA>> COROLLA CROSS>> PROXIMITY>> 2022-

Then perform the functions below.

Step 1: Read Immo Data

Step 2: Make Simulated Card (Key SIM)

Step 1: Read Immo Data

Turn off the ignition switch, and cycle the double flash on-off once

Save the immo data after reading

Step 2: Make Simulated Card (Key SIM)

Please pay attention to the following prompt:

1.This function can make simulated key when all the keys are lost (note: simulated key needs to be kept charged, and it needs to be made again after the power is off);

2.The simulated key can replace the original car key to add keys, erase keys and other operations;

3.Has the current vehicle immo data been read? If the immo data is not read, please execute the immo data reading function first.

Select the immo data just saved

Connect the OBDSTAR Key SIM simulator to make

Wait a moment until the simulated key is made successfully

Then place the simulated key close to the start button and try to light up the instrument. If the instrument can be lighted up normally, please use the simulated key instead of the original car key for proximity key programming (no need pin code) or all keys lost programming with the immo data read.

FYI…

In addition to 2022 TOYOTA COROLLA CROSS, OBDSTAR X300 DP Plus key programmer also supports other Toyota 4A and 8A-BA models proximity key programming (no need pin code), and all key lost (need Key SIM).

1.TOYOTA 4A type (equipped with TMLF19D type smart key box)

  • Yaris 2020+ (XP210)
  • Yaris Cross 2021+ (XP210)
  • Corolla Facelift 2022+ (E210)
  • Corolla Cross Facelift 2022+ (XG10)

2.TOYOTA 8A-BA models (equipped with TMLF19D type smart key box)

  • Sienna 2020+ (XL40)
  • Harrier/Venza 2020+ (XU80)
  • Tundra 2021+ (XK70)
  • Land Cruiser 2021+ (J300)
  • RAV4 Facelift 2022+ (XA50)

8A-BA models upgrade expected in August 2023!

Note: these models are also compatible with OBDSTAR X300 PRO4 key programmer.

2023 OBDSTAR Toyota-30 Cable:

https://www.uobdii.com/wholesale/obdstar-toyota-30-cable.html

 

Share