Confirmed! OBDSTAR DC706 ECU Tool read and write BOSCH ME17.8.8 ECM by bench successfully!
It’s very easy and fast to operate with the operation guide and PINOUT in the device software.
OBDSTAR P003 Adapter, ECU Bench cables and OBD cable are required to connect DC706 ECU Tool and ECM.
Keep DC706 charging and communicating during the process, and make sure the internet connection is normal.
Select ECU Flasher>> All>> ECM>> ECM V30.23>> ECU Brand>> BOSCH
Input me17 in the search box to quickly find out the ECM model- BAIC BOSCH ME17.8.8 TC1728 (BENCH+ P003)
After connecting, tap “Start” to enter the operation interface
Connect ECU successfully
Read and back up original INT EEPROM data
Read and back up original INT Flash data
Connect OBDSTAR DC706 to a new Bosch ME17.8.8 ECM
Select the corresponding INT EEPROM and INT Flash files just saved to write into the new ECM
All read and write operations are completed.
Foxflash also can support Bosch ME17.8.8 TC1728 via bench/boot/OBD.
CG FC-200 (V126.96.36.199 or above) supports ME17.8.8 on bench.
PCMTuner Module 53 also can support this Bosch type.