Godiag ECU GPT Boot AD and SM2 Pro Read Hyundai M7.9.8/SIM2K ECU

October 20, 2023 uobdii ECU Programmer/Chip Tuning Tool 0

Godiag ECU GPT Boot Adapter is able to work with SM2 Pro and PCMFLash software to identify and read Hyundai M7.9.8/SIM2K ECUs no issues.

What is Godiag ECU GPT Boot AD?

GODIAG ECU GPT Boot AD Programming Adapter can help customers read and write ECU data via OBD2 Bench, GPT Bench (no disassembling the ECU), and Boot method (disassembling the ECU). It is equipped with a short-circuit-proof BOOT resistance board connection line to protect the ECU. Customers can use it with J2534 devices and PCMFLash software.

Features:

  1. ECU dedicated connection terminal.
  2. Support manual ignition power control
  3. The ECU interface cable is labeled
  4. Support ECU conversion to OBD2 mode to read and write data
  5. Support RESET, BOOT, CNF1, GPT1, GPT2, 5V, 3.3V, VPP, GND.
  6. Support PCMFlash automatic control of ignition power supply
  7. Support ECU opening BOOT method to read and write data
  8. CANbus is equipped with a switch to freely select the 120Ω resistor
  9. Support GPT to read and write data without disassembling the ECU.
  10. Equipped with BOOT resistance board connecting cable [anti-lost resistor design]

Functions:

Godiag ECU GPT Boot AD can perform diagnostic functions with standard OBD2 protocol equipment, and support ECU reading and writing with J2534 devices.

Only Scanmatik 2 PRO for PCMflash allows you to form GPT1, GPT2 signals necessary to work with Module 71.

Other devices Scanmatik OpenPort 2.0, Mongoose JLR, MongoosePro JLR,

Teradyne GNA600 (VCM 1), Mazda VCM 2 supports OBD2 or BOOT 53 mode to read and write ECU data.

How to identify and read Hyundai ECU?

1.Connection

Connect SM2 Pro and computer via USB cable

Connect SM2 Pro and Godiag GT100+ OBD2 Breakout Box

Plug Godiag ECU GPT Boot AD Connector into Godiag GT100+

Connect Godiag ECU GPT Boot AD and Hyundai ECU according to the wiring diagram

Plug PCMTuner Dongle into the computer

Supply power to GT100+, and press the power button

Press the “MNL” button on Godiag ECU GPT Boot Adapter

2.Run Pcmflash software to operate

Open pcmflash software

Select the correct interface and ECU model to start the function operation

  • For Hyundai M7.9.8

Connection images

Select the related options below:

Interface: J2534: Scanmatik- SM2 USB

ECU model: [19] Kia/Hyundai: 1.4L, 1.6L (M (G)7.9.8)

Identify the ECU- OK

  • For Hyundai SIM2K ECU

Connection images

Select the related options below:

Interface: J2534: Scanmatik- SM2 USB

ECU model: [30] Kia/Hyundai: 2.0L, 2.4L (SIM2K-140)

Identify the ECU- OK

Read DTC- OK

Read ECU data-OK

It will show the current battery voltage and tell you turn off all electrical load and turn ignition on.

Click “OK” to continue

Save the data file after reading, success

GODIAG ECU GPT Boot AD ECU Connector:

https://www.uobdii.com/wholesale/godiag-ecu-gpt-boot-ad.html

Share