Autel Maxisys Ultra Brief Introduction in the first part, and followed with the comparison among Autel MaxiSys Ultra, MS919, MS909, MaxiSys Elite and MaxiSys 908S Pro, finally ends with Autel Maxisys Ultra in-depth Review.
Part 1. Autel Maxisys Ultra Brief Introduction
The history of Autel diagnostics is a foundation success built on ingenuity and evolution of design and functionality. Autel Maxisys Ultra is the future intelligent diagnostics, a larger tablet for multi-window operation. Display:13 inch TFT-LCD with 2732 x 2048 resolution & capacitive touch screen.
Maximize your intelligence with powerful hardware (Memory: 4GB RAM & 256GB On-board Memory; processor: Samsung Exynos8895V octa-core Processor (2.3GHz Quad-core Mongoose + 1.7GHz Quad-core A53)
Faster analysis and expanded data storage (256GB SSD UFS2.1 Up to 256GB MicroSD Expansion).
Meet busy repair demands with a substantial battery capacity (18000mAh lithium – polymer battery, 8 hours continuous operation).
HD dual cameras capture every detail ( Rear: 16 Megapixel, Autofocus with Flashlight; Front: 5 Megapixel)
Dual wi-fi connection to the VCMI device and a wireless network simultaneously for faster diagnostics.
MaxiFlash VCMI is more powerful than ever, multi-channels simultaneous analysis.
The test components and confirm repairs.
New protocols to support the vehicles of today and tomorrow.
Supported protocols: DoIP, CAN FD, D-PDU, J2534, RP1210.
Expanded passenger and increasing commercial vehicle coverage (Provide Latest OE Level Coverage for more than 80 US Domestic, Asian and European vehicles, including supercar).
Complete diagnostic detection system.
And repair confirmation in Five-in-One combination.
Advanced VCMI 5-In-1 Device: VCI, OSCILLOSCOPE, MULTIMETER, WAVEFORM GENERATOR, CAN BUS CHECK
Vehicle communication and measurement interface, easier oscilloscope
operation with built-in preset guided tests for operation and analysis.
Faster system communication malfunction detection using OBD2 Can bus check.
Autel MaxiSys Ultra is smarter than ever, faster then scan recognition for vehicle identification.
New topology module mapping of CAN BUS 3 with color coded module status for faster full-system diagnostic results.
Autel MaxiSys Ultra intelligent diagnostics provides direct access to only related TS BS recalls and service campaigns.
Repair Assist diagnostic guidance is designed to support from DTC to diagnostic analysis to repair recommendation options easily and efficiently,
MaxiFix is more efficient than ever, search multiple options of DTC-based repair advice by relevant cases or repair tips, video and document libraries. Providing direct access to top-ranked repair recommendation from industry pros.
Everything you have been waiting for, this is Autel MaxiSys Ultra.
The MaxiSys Ultra is a multi-platform diagnostic solution comprised of a powerful 13 inch TFT-LCD touchscreen Android-based tablet, a VCMI communication and diagnostic measurement unit and an on-tool and cloud-based repair instructions and expert advice.
As an intelligent diagnostic and information system, MaxiSys Ultra not only displays the relevant repairs gathered from experienced industry experts, but provides step-by-step guidance to ensure the repair is done correctly and efficiently.
Look at the comparison table below:
Part 3. Autel MaxiSys Ultra in-depth Review
Highlights: 5-1 VCMI
Autel MaxiSys Ultra is an excellent all-system diagnostics tool, it wins Autel Elite / MS908S Pro in the 5-1 VCMI. You get a tool that comes bundled with a VCI that transforms it into a 4-channel oscilloscope, multimeter, CAN BUS tester, and waveform generator.
Most advanced system diagnostic tool
Autel MaxiSys Ultra is highly recommended for advanced system diagnostic tool because it can perform more functionalities.
MaxiSys Ultra is able to perform system diagnostics, including read trouble codes from all modules for 90% of OBD2-compliant vehicles. including but not limited to the engine, transmission, antilock brake system (ABS) and airbag system (SRS).
It can produce freeze frame data, powertrain diagnostic data, emission diagnostic data, emission diagnostic trouble codes, oxygen sensor monitoring test results, and onboard monitoring tests.
It can perform intelligent diagnostics. When you insert the scanner, it will automatically read the VIN information.
Autel MaxiSys Ultra supports topology mapping. This means they can check all systems communications and DTCs visually.
Meanwhile, with the MaxiSys Ultra, you can see two different functions since it supports split-screen multitasking. Furthermore, you can turn the MaxiSys Ultra into a 4-channel oscilloscope, waveform generator, CAN Bus Tester, and multimeter.
Advanced special functions
The Service section is specially designed to provide quick access to the vehicle systems for various scheduled service and maintenance tasks. The typical service operation screen is a series of menu driven executive commands. Follow on-screen instructions to select appropriate execution options, enter correct values or data, and perform necessary actions. The application will display detailed instructions to complete selected service operations.
After entering each special function, the screen will display two application choices: Diagnosis and Hot Functions. The Diagnosis enables the reading and clearing of codes which is sometimes necessary after completing certain special functions. Hot Functions consists of sub functions of the selected special function.
Autel MaxiSys Ultra offers up to 36 advanced service functions including oil lamp reset, injector coding, electronic parking brake reset, steering angle calibration, ABS bleeding, TPMS reset, etc.
If you’re looking for repair advice, MaxiSys Ultra gives you detailed repair information and illustrations. It also includes an extensive waveform library, plus Oscilloscope preset guides.
Autel MaxiSys Ultra scanner has bidirectional functionality, that means you can perform active tests on various systems and modules. But the specific systems supported are dependent on the vehicle make and model.
Coding & Programming
Autel MaxiSys Ultra can perform coding and programming for countless models including Online ECU programming on Benz and BMW models, online coding on VW/Audi, Seat, Porsche, Renault, and again, BMW and Benz models. For online ECU programming, MaxiSys Ultra can do so without special connectors on BMW F&G chassis. It can perform new chassis online programming and SCN on Benz.
The Programming and Coding function is used to re-flash the vehicle control modules, which allows you to update the computer software of the vehicle to the latest version, as well as to reprogram adaptive data of certain components after making repairs or replacements.
Note: The programming function applies only when the vehicle is connected with a VCMI device, which serves as a PassThru interface to establish communication with and transfer data to the vehicle’s ECU.
Available programming or coding operations vary by test vehicle. Only the available operations display in the tablet menu.
There are two general types of programming operations:
- Coding – also known as Teach-in Program, or Component Adaptation, is used toreprogram adaptive data for vehicle control modules after repairs or replacementsof vehicle parts.
- Reprogramming – downloads the latest version of software from the online serverdatabase through Internet access (this procedure is done automatically when thetablet is connected to the Internet, so there is no need to check for software updates yourself), and reprograms the newest version into the vehicle’s ECU.
Ensure that the tablet is connected to a stable internet access before applying the ECU programming function, so that the tablet is able to obtain access to the vehicle manufacturer’s server for update service.
Selecting the Programming or Coding function opens a menu of operation options that varies by vehicle make and model. Selecting a menu option either displays a programming interface or opens another menu of additional choices. Follow all screen instructions while performing the programming or coding operations. How and what information is presented on the screen vary by the type of operation being performed.
Wide Vehicle Coverage
Autel MaxiSys Ultra covers 80+ car brands from US car brands, to European and Asian vehicles, and access full-system to perform OBD2 diagnostics. It is highly recommended for BMW and Mercedes beside tens of other brands.
For the specific vehicle coverage of MaxiSys Ultra, please refer to the official site: https://www.autel.com/vehicle-coverage/coverage2
DoIP, PLC J2497, ISO-15765, SAE-J1939, ISO-14229 UDS, SAE-J2411 Single Wire Can (GMLAN), ISO-11898-2, ISO-11898-3, SAE-J2819 (TP20), TP16, ISO-9141, ISO-14230, SAE-J2610 (Chrysler SCI), UART Echo Byte, SAE-J2809 (Honda Diag-H), SAE-J2740 (GM ALDL), SAE-J1567 (CCD BUS), Ford UBP, Nissan DDL UART with Clock, BMW DS2, BMW DS1, SAE J2819 (VAG KW81), KW82, SAE J1708, SAE-J1850 PWM (Ford SCP), SAE-J1850 VPW (GM Class2)
For how to use Autel MaxiSys Ultra, please refer to the user manual:
For where to purchase Autel MaxiSys Ultra at reasonable price, here you go: