I used Xhorse Dolphin XP-005 to cut Renault Clio III (VA2EH2), I got the key code but when entering the code I got out of lines cuts, shown as below.
Code: 4718HQ
Blade: VA2EH2
What to do next?
Out of line means machine won’t accept code 4718HQ which he obtain. Once I also had this in Viper. Solution is to input direct cuts manualy as one of code which you mentioned. His problem is not his machine cuts wrong key.
So input direct cuts and all good. When I go quite far and cut VA6 from code, I always cut 2 blades just in case. One cut normally and 1 reversed. Because I’m always confused with this if I get from dealer need to revers eor not.
Simply connect phone to the tool , use all key lost function , work fine !
XHORSE is not freeware app , if app is not connected to key cutting tool , result is your picture !!!!!!!!
NO PROBLEM
Did a Clio III AKL today, picked with Lishi and entered bitting into xhorse app to cut key on Dolphin, worked fine.
Question: the car is about 6 hour drive from here. How to cut from the Key code?
Answer: When car is so far, ask customer remove UCH + door lock. Tango or Xhorse VVDI from UCH dump and lishi for pick and decoding.
My X6/V8 use VA6 decode menu with 1-4 heights.
Question: Do anyone here know which tools program this car key? Except ZedFull..
BCM L2 CR according to search online.
Answer: Many tools with program it via OBD, it’s very easy car. Or you can do by dump via Tango, 95160 eep.
Good Luck!
