How to use CG FC-200 with MPC5xx Adapter Read and Write BMW BOSCH EDC16

July 3, 2023 uobdii ECU Programmer/Chip Tuning Tool 0

CG FC200 ECU programmer with the new MPC5xx Adapter  read and write BMW BOSCH EDC16CP35 MPC563/4 in bench mode.

Steps:

First, connect CG FC200 to one computer via the USB cable, and also connect with a power supply

Then, run FC200 V1.1.3.0.

Select BMW>> 5-Series (E60)>> 2993 M57D30O2 235>> BOSCH EDC16CP35 MPC563/4>> Platform

Next, check the wiring diagram, and follow it to connect FC200 and BMW ECU

Connect the FC200 Vehicle-grade wiring harness to ECU

Connect FC200 programmer and MPC5xx Adaptor, and connect to the another end of Vehicle-grade wiring harness

After that, start to get ECU authorization and perform read/write operation.

Verify authorization successfully, and identify the chip is MPC563_4, connection succeed.

Read PFLASH, ExtEEPROM, and ExtFLASH in sequence, all are ok.

Successfully save the related original data after reading.

Finally, select the corresponding file to write, perfectly!

Credit to@ YOYO Diagnostic.

Share

Related posts:

  1. How to use CG FC-200 ECU Programmer and ISN Code Reade
  2. CG FC-200 ECU Programmer V1.0.4.0 Update
  3. CG FC-200 ECU Programmer FAQs
  4. CG FC-200 V1.0.6.0 Update: Add Edit Engine Computer VIN
  5. CG FC-200 read and backup VW BOSCH ME17.5.20 TC1767
  6. CG FC-200 Tutorials: Read and Write VW Tiguan (AD/BW) DQ250 TC1766 Transmission
  7. CG FC-200 BMW MEVD17.2.5 TC1797 N13 ISN clone
  8. How to activate Continental TC17 Read / Write Date Function