KEYDIY KD-X4 can extract the 28-digit PIN code from the Nissan HFM module for supported Nissan models. By connecting the HFM PCB to the KD-X4 through the MINI Prog cable, users can read the IMMO data, calculate the PIN, generate a remote file, and complete key programming.
Supported Nissan Models
- Nissan SYLPHY / SENTRA B18
- Nissan X-TRAIL / ROGUE T33
- Nissan PATHFINDER (2021+)
- Nissan QASHQAI (2021+)
- Nissan NOTE e-POWER
- Nissan NP300 (2019+)
- Nissan JUKE (2020+)
- Nissan RS3
Example: Nissan X-TRAIL T33 All Keys Lost
Step 1: Connect the HFM Module
- Remove the HFM module from the vehicle.
- Find the correct solder points according to the wiring diagram.
- Solder the MINI Prog cableto the HFM PCB, then connect the cable to KD-X4 Key Programmer.
Step 2: Read HFM Data
- Run the Readfunction on KD-X4 to extract the raw memory data from the HFM module.
- Save the read file to your device for the next step.
Step 3: Calculate the PIN and Program the Key
- Select:
NISSAN → Select by type → Smart key system → T33 → 2021- (00.10.01.00)
- Load the saved IMMO data. The KD-X4 will calculate the 28-digit PIN code, which can be used for key matching when all keys are lost.
- Generate the remote file onto a KEYDIY KD ZB03 Universal Smart Key.
- Use the diagnostic interface to complete key matching. Finally, check whether the remote and vehicle starting functions work correctly.
With the correct HFM connection and data, KEYDIY KD-X4 5-in-1 key programmer provides a practical method for supported Nissan HFM PIN extraction and all-keys-lost key programming.
