Yanhua ACDP Benz DEM / ISM Renew with 12-in-1 interface board / Module 18

Yanhua Mini ACDP is able to perform both DME renew and ISM renew.

1.Mercedes Benz DME renew in interface board mode:

Need:

Yanhua Mini ACDP + MB 12 in 1 Interface Board

Compatible Mercedes-Benz DEM types:

Mercedes-Benz CR4.XX/ CRD2.XX/ CR5/ ME9.7/ SMI271KE2.0/ CRD.11/ SIM271DE2.0/ CR3.XX/ SIM4LKE/ MED17.7X/ CR6/ SIM266 DME on bench.

Pros of interface board mode:

1): Mercedes-Benz dedicated interface, no wire separation, quick plug and unplug.

2): Automatically identifies and connects 12 models of Mercedes-Benz DME.

3): Pin automatic detection, safe and reliable, to avoid wiring errors damaging the circuit.

Image 1: Yanhua Mini ACDP MB 12-in-1 interface board

Image 2: in Interface board mode VS in traditional methods.

  1. Mercedes Benz DME renew in wiring mode:

Need:

Yanhua Mini ACDP + Module 18 Benz DME ISM Reflash

Compatible Mercedes-Benz DEM types:

CR3.XX/CR4.XX/CR5/CR6/CR60.XX/SIM271DE2.0/SIM4LKE/SIM271KE2.0/CRD.11/CRD2.XX/ME9.7/MED17.7.X/SIM266 etc.

Image 3: Module 18 Benz DME ISM Reflash

  1. Mercedes Benz ISM renew

Need:

Yanhua Mini ACDP + Module 18 Benz DME ISM Reflash

(Good to know: MB 12-in-1 interface board adapter can’t support ISM refresh yet. )

Function:

Identify

Refresh

Modify VIN

Operation guide: Yanahua Mini ACDP Module 18 Mercedes-Benz DME/ISM Refresh Operation Guide (in wiring mode)

Image 4: Mercedes Benz ISM wiring diagram

Image 5: Mercedes Benz ISM Refresh Operation in APP.

Procedure in step-by-step:

Mercedes Benz DME renew using Yanhua Mini ACDP + MB 12 in 1 Interface Board 

Prepare: connect Yanhua Mini ACDP to MB 12-in-1 interface board adapter on bench

Step 1. Please prepare ACDP, adapter, interface board and DME.

Step 2. Connect the interface board correctly to the DME interface as shown.

Step 3. Short the CAN resistor on the adapter to the “CAN-R Join”.

Step 4. Connect ACDP, adapter, interface board and DME.

 

Mercedes-Benz DME Renew On bench (in interface board mode):

Open Mini ACDP APP, click on “Benz”, then “DME refresh”.

Select any of DME mode from: CR3.XX, CR4.XX, CR5, CR60.XX, CRD.11, CRD2.XX, ME17.7, ME9.7, MED17.7.X, SIM266, SIM271DE2.0, SIM271KE2.0, SIM4LKE etc.

Good to know:

ME2.8 and SIM4LE DME renew need Mercedes Benz Module 18.

The other DME modes supports both in interface board mode and in wiring mode.

Note:

1.Please connect ACDP with DME properly;

2.Please don’t cut the power nor pull out the device during the operation.

SIM266 for example, there are two options:

Interface board mode (using MB 12-in-1 interface board adapter)

Wiring mode (using module 18)

We have MB 12-in-1 interface board adapter, so we select ” Interface board mode”. Its function is to Identify and Refresh.

Note:

1.Please connect ACDP with DME properly;
2.Please don’t cut the power nor pull out the device during the operation.

Okay, hope it helps!

Learn more:https://www.uobdii.com/wholesale/yanhua-mb-12-in-1-interface-board-adapter.html

Share