How to use Xhorse VVDI Key Tool Plus to add a new BE key to Mercedes- Benz W207 with original key via OBD on the platform.
For operation convenience, has removed the dashboard from the vehicle
Insert the original key into the EIS to turn ignition on
Connect VVDI Key Tool Plus to the dashboard via OBD cable
Then operate on Key Tool Plus Pad
Step 1: Read lock (EIS) data
Tap Immo Programming>> Benz>> Select from system>> EIS Tools>> Start programming>> W172, 204, 207, 212 (with ELV)>> Read the lock (EIS) data>> OBD
Read the key info successfully (EIS P/N: 207 5450108, last used key: key 2)
Save the file
Step 2: Program key file
Back to select from system option
Select Prepare Key File>> Start programming>> Prepare Key File
Load the EIS file with password
Confirm if the SSID and password are correct
Confirm the key password
Select the type of the generated key file (V051)
Queue number 1, requires 30 seconds, query after 5 seconds
Calculating, require 30 seconds, query after 5 seconds… (cannot be cancelled)
Save the key file directly
Key file generation completed and saved successfully
Step 3: Read/Write key via IR
Back to select from system option
Select Read/Write Key>> Read/Write key via IR>> Start programming>> Write BE key
Load the key file to be written
Insert the new BE key into the infrared antenna of the Key Tool Plus
Write data success
The key is smart key (BE), so need to install battery and wait 1 minute before learn key to car (the key LCD will flash during this time)
Take out the original key, and the activation key generally directly inserted into the car to activated.
Kindly notice:
If you cannot activate, please try the following methods:
- Manual activation by select from system>> read write key>> read/write key via IR>> Activate
- Read EIS data again and generate key file again
- Try to unplug theOBD connector, insert the BE key into EIS to activate
Done!
Alright! Mercedes- Benz W207 new BE key has been programmed by Xhorse Key Tool Plus Pad successfully.
Video Guide:
