Xhorse VVDI BIMTool Pro Solved BMW 8A Motorcycle Tire Pressure Monitor Malfunction DTC

It becomes highly popular to program BMW motorcycle 4D or 8A models by Xhorse VVDI Key Tool Plus Pad or VVDI2 Key Programmer. But sometimes, there may be some DTCs on the screen cannot be cleared after completing 8A key programming for a few BMW motorcycles. In case where “Tire Pressure Monitor Malfunction” appears after key programming of BMW motorcycles, we can use VVDI BIMTool or BIMTool Pro to resolve this problem as follows.

Step 1: Connect tools

Connect VVDI BIMTool Pro to both computer via USB cable and motorcycle’s OBD port

Step 2: Connect car

Run BIM Tool software

Navigate to “Fxx/Gxx Program/Code” on the main screen

Select “Auto detect” in the dropdown menu and click on “Connect car” to retrieve the vehicle information

Step 3: Calculate programming

After detecting the vehicle info, click on “Vehicle programming”

The “target istufen lev” should be the same as the “Shipment date”.

If there is no shipment date available, choose the latest date

Click on “40 FEM (X_SLZ)” and “Calculate programming file”

The new programming file is calculated successfully for the vehicle. Press “Yes” to use system calculate program version.

The calculation is complete. The gray areas indicate the module’s current module version information and the orange areas indicate the calculated programmable version information

Step 4: Programming

Click on “Programming” to proceed

Step 5: Clear DTC

After the programming is completed by VVDI BIM Tool Pro, click “DTCs” to read the vehicle’s DTCs and clear them.

Upon clearing the DTCs, verify that the motorcycle screen no longer appears any fault codes.

Done!

Share