Two Ways to Read MQB NEC35xx IMMO with VVDI Key Tool Plus/VVDI2+VVDI Prog

As we known, after activating Xhorse MQB Authorization, Xhorse VVDI Key Tool Plus Pad or VVDI2+VVDI Prog can read MQB NEC35xx Locked IMMO Data to add new key and do all keys lost (AKL needs synchronize data by third-party). There are two wiring diagrams for using: by Lift PIN diagram and by Cut PIN diagram.

Xhorse devices required:

Xhorse VVDI Key Tool Plus Pad Full Configuration (has VW software and Prog function)

VVDI2 Full Version Plus VVDI Prog

Assistant tools recommended:

  • Scaling powder
  • Hot-air gun
  • Enameled wire gummed paper
  • Electron microscope
  • Tweezer and operating knife with pointed tip


Tips to activate Xhorse VW MQB license:

  • Register your Key Tool Plus Full Configuration/ VVDI2 programmer before activation
  • Buy the Xhorse VW MQB Licenseand provide your device SN (incl. Key Tool Plus/Xhorse VVDI2 and VVDI Prog) to our customer service for activation.
  • Once the MQB authorization is activated, please use the corresponding device to read data. If you use other programmerto read, then the VW MQB add key/all keys function will not be supported.

Part 1:

Read MQB NEC35xx IMMO data with VVDI Key Tool Plus

1.Xhorse Key Tool Plus MQB Dashboard NEC3525 Lift Pin & Cut Wire Tutorial

By Lift PIN diagram:

By Cut PIN diagram:

The guide to read MQB NEC3526 is the same as NEC3525.

By Cut PIN diagram:


2.Xhorse Key Tool Plus Pad MQB Dashboard NEC3532 Cut Wire Advanced Tutorial

By Cut PIN diagram:


3.How to read MQB Locked NEC35xx by VVDI Key Tool Plus

i.e MQB NEC3525 dashboard


Part 2: Read MQB NEC35xx IMMO data with Xhorse VVDI2+ VVDI Prog

i.e. MQB NEC3526

How to read MQB Dashboard Data by VVDI Prog and VVDI2

By Lift PIN diagram:

By Cut PIN diagram:

Contact us at:


WhatsApp: +86-13995696053

Phone: +86 13995696053

Skype: UOBD2.COM