How to read BMW BDC2 key data using CGDI K2 and GODIAG 14 in 1 Adapter Kit.No soldering! No disassembling! Here is the detail steps: before the key data reading, the tools below is what we need.
Tools:
1. CGDI K2 Smart Key Tool with key unlock renew cable
2. GODIAG 14 in 1 Adapter Kit
3. BMW BDC2 Key Board
How to do:
Connect GODIAG BDC2 Adapter and CGDI K2 via Key Unlock Renew Cable
Note:
Strip a longer section of the insulation to expose the bare wire, so that the DIY contact socket can make proper contact with the metal wire.
Connect GODIAG BDC2 Key and BDC2 Adapter using connecting cable
Then connect GODIAG BDC2 Key and key board correctly according to the test point
After connection, turn on CGDI K2 key tool
Navigate to Key Adding-> Add New BMW Key -> Add BMW BDC2 Blade Key
Read the on-screen instruction carefully, and click “Start the operation”
Click “Continue”
The yellow indicator light on GODIAG BMW BDC2 Adapter turns on when reading data
Read key data successfully, enter a new file name to save it
Done!
