CK-Prog Programmer Software Installation Guide

This guide explains how to connect your CK-Prog device, install the CK-Prog software, and update the device to the latest software version.

System Requirements

Windows laptop or PC
CK-Prog device
Power cable
Type-C USB cable
Internet connection (required for software download and updates)

Step 1: Connect the CK-Prog Device

Connect the power cable to the CK-Prog device from uobdii.com.
Verify that the device powers on and the screen lights up.
Connect the CK-Prog device to your laptop using the supplied Type-C USB cable.

Note: Ensure the device remains connected throughout the installation and update process.

Step 2: Download and Install the CK-Prog Software

After connecting the device, download the CK-Prog software package.
Locate the downloaded CK-Prog Setup.exe file.
Double-click the setup file to start the installation.
Follow the on-screen instructions to complete the installation process.
Once the installation is finished, launch the CK-Prog software.

Step 3: Update CK-Prog Software

Open the CK-Prog software after installation.
Click the Update button located in the top-right corner of the software window, as shown in the image provided.
The software will automatically check for available updates and install the latest version.

Important:

Do not disconnect the CK-Prog device during the update process.

Do not close the software until the update has been completed successfully.