CG FC200 V1.3.0.0 Added Marelli 7GV SID208 DSM MC9S12XEQ512MAL

September 3, 2025 uobdii ECU Programmer/Chip Tuning Tool, OBD2 Software Update 0

The latest software V1.3.0.0 of CG FC200 ECU Programmer was released on August 28, 2025.

This update adds major new functions including: “Three readiness monitors not ready”, “DTC disabled”, “VIN modification”, “Checksum”, and “DTC OFF” functions, etc for Volkswagen, Mercedes-Benz, Hyundai/Kia, etc. Check the detailed upgrade info below.

cg fc200 v1.3.0.0 udpate-1

Here’s what’s new in this version:

1.Added 13 ECU –supported models:

Volkswagen: Marelli 7GV

Saic/Wuling (Platform): SIM2K-D51, SIM2K-51.4, SCE60

Ssangyong: SIM2K_C201_ECU

Mercedes-benz: DSM MC9S12XEQ512MAL

Peugeot Citroen/Ford/Land Rover/Mazda: SID208

Renault/Dacia: EMS3120

Wuling: SIM2K-34, Eaay_U1 2W

Jianghuai/Wuling: FC-34

Golden Cup (BOOT): SIM2K-91

Jingbin: KEIHIN 37820-Rxx-xxx MPC5566

2.Added 31 ECU types to “Three readiness monitors not ready”:

Hyundai Kia: SIM2K-140, EDC17C57

Volkswagen Audi: MED17.1.27, MED17.1.61, MED17.1.62, SIMOS8.6, MED9.1

Mercedes-Benz: SIM271DE20

Chinese products: MD1CE108, EDC17CV54, EDC17CV53, EDC17CV44, EDC17CV43, MT22.1, MT22.1.1, MG1US008

Wuling: Easy_U3.6, Easy_U2W, Easy_U2.5, EASy_U2W

Geely: Easy_U2

Ford: SID209

Dongfeng/JAC/Isuzu/Deutz: MD1CC878

Suzuki: ME17.9.61, ME17.9.64, ME17.9.6, ME17.9.51, ME17.9.5, MED17.9.63

Baic/Besturn/BYD/Changan /Cirelli/ Dongfeng/FAW/Geely/Great Wall/JAC /Proton/

Trumpchi/Wuling: MG1UA-UP8

Changan: MED17.9.63

3.Added 17 ECU models with DTC Disabled:

Volkswagen: EDC17CP20, EDC17CP44, ME7.1, ME7.1.1

Ford: SID208, SID209

Mercedes-Benz: EDC17CP46, MED9.7, ME9.7

Peugeot Citroen: SID807, SID807EVO, EDC17CP42

Renault: SID307, SID310

Volvo: SID807, SID807EVO

Porsche: SDI 10.X

4.Added 1 ECU model to modify VIN:

Ford: EDC17CP65

5.Added 3 ECU models with checksum:

Dongfeng/JAC/Isuzu/Deutz: MD1CC878

Dongfeng: FC-34

Dongfeng/BAIC/Great Wall/Geely /Cirelle/Proton: MG1UA008

6.Optimized ECU function

(1) ECU with “Three readiness monitors not ready”: ME7.4.4, ME7.5, TR40, LEC4A, STC-213

(2) Disable the DTC: Ford_Delphi_DCM_6.1, Hyundai-Kia Bosch EDC16C39, Bosch EDC17C49, VAG Bosch EDC17_CP14, MB_Bosch_EDC17_CP46, BMW Bosch MED17.2, BMW Continental MSD808185, Porsche Continental SDI10.x, VAG Continental SIMOS 12, BMW Bosch MG1CS003, MB Bosch EDC17CP46

Bug fix

  1. The issue where some Easy_U2W cannot write data
  2. Optimize the failure issue of the AP reading in Mahindra 7.1
  3. Optimize the function of disabling DTC in some ECUs.

cg fc200 v1.3.0.0 udpate-2

www.uobdii.com

 

Share