CK-Prog Programmer Software Installation Guide

This guide explains how to connect your CK-Prog device, install the CK-Prog software, and update the device to the latest software version.

System Requirements

• Windows laptop or PC
• CK-Prog device
• Power cable
• Type-C USB cable
• Internet connection (required for software download and updates)

Step 1: Connect the CK-Prog Device

1. Connect the power cable to the CK-Prog device from uobdii.com.
2. Verify that the device powers on and the screen lights up.
3. Connect the CK-Prog device to your laptop using the supplied Type-C USB cable.

Note: Ensure the device remains connected throughout the installation and update process.

Step 2: Download and Install the CK-Prog Software

1. After connecting the device, download the CK-Prog software package.
2. Locate the downloaded CK-Prog Setup.exe file.
3. Double-click the setup file to start the installation.
4. Follow the on-screen instructions to complete the installation process.
5. Once the installation is finished, launch the CK-Prog software.

Step 3: Update CK-Prog Software

1. Open the CK-Prog software after installation.
2. Click the Update button located in the top-right corner of the software window, as shown in the image provided.
3. The software will automatically check for available updates and install the latest version.

Important:

• Do not disconnect the CK-Prog device during the update process.
• Do not close the software until the update has been completed successfully.

Installation Complete

The CK-Prog Programmer software is now installed and updated to the latest version. Your device is ready for use.