Topic: free offer source of FGTECH GALLETTO V54 0475 / 0386 FIX EPT HEX DUMP & PROGRAM; source of FGTECH v50 v54 0386 error crash solution; source of Fgtech V54 0386 AES Software FIX for Win7-64bit.
Suitable: FGTECH v50 v54 0386 error crash
How to fix fgtech software not compatible with windows system:
Supplied by uobdii.com engineer.
Password: PM to @ fantomel (DK member)
What you can find here:
1.For tool number 0386: ept file,fix file,hex dump and 2 versions of programs V54 used for it, the one from china and the AES November software.
2.For tool number 0475: ept file,fix file, hex dumps made from my tool and program V54 for it that does not need time back.
3.For both tools you have here how to connect to it, how to read firmware movie, how to write dump that you wish.
Reading and writing the mcu for this tool can be done with old Philips LPC 2000 software and USB-TTL adapter, preferd the one that uses PL2303 chipset. You need also a jumper in position to do that.
If you want to check CRP level of your NXP mcu you can do that with FlashMagic and USB-TTL adapter.
Fgtech V54 0386 AES Software FIX for Win7-64bit – tested 100%
Contributor: @ionutbutusin (cartechnology.co.uk)
1.Fix driver for win7-64bit .. DRIVER CANNOT START CODE 10…AND FUNCTIONING TOGETHER BDM100 SOFTWARE AND DRIVER
ON THE SAME PC WINDOWS 7-64Bbit
2. AES Software
3. Fix read 5% error
1.My FGTech V54 0475 works now under Win10
I succeeded to run FGTECH Galletto 0475 on windows 10 64bit.
Windows Vista or above detected, making a second patch.
Right click on fgtech icon dann properties denn compatibility and change program compatibility windows 7 or windows 8. Works fine on my lenovo laptop.
2.FGTech Galletto V54 0475 works with win 7 32bit without problem.
3.FGTech Galletto V54 0475 works with win7 64bit?
It needs lucky. better run with Win7 32bit.