BMW ICOM—a BMW approved dealer OBD-II diagnostic tool for BMW, MINI Cooper and Rolls Royce with ISTA-D, ISTA-P software and other engineering & developing software applications.

BMW ICOM hardware:

The BMW ICOM hardware has been released to third generation, ICOM A, ICOM A2 and ICOM A3.



All BMW ICOM A+B+C systems come with ICOM A, ICOM B and ICOM C emulators.

ICOM A – main adapter with OBD II connector for MOST, KCAN, DCAN

ICOM B – additional adapter for optic line, use USB connection with ICOM A

ICOM C – adapter for old vehicles with round 20-pin connector.


BMW ICOM software has two formats: internal software HDD and external HDD.

The ISTA/D diagnostic system stands for Integrated Service Technical Application Diagnostic. ISTA/D is used to diagnose BMW all series and models from all systems.

The ISTA/P programming system is an ISPI application and stands for Integrated Service Technical Application/Programming. ISTA/P is used to process all coded, programmed and enable-dependent control modules in BMW Group vehicles.


The BMW ICOM Rheingold ISTA-D ISTA-P diagnostic & programming software comes with engineering software INPA, EDIABAS Tool32, NCS-expert tool, E-sys, Ncs-Dummy etc.

-INPA (used for diagnosis)

-EDIABAS (used for diagnosis)

– BMW INPA (used for Diagnosis and error resetting)

– BMW NCS Expert Tool (used for coding – activating new options like BMW dealers do)

– BMW WinKFP (used for updating the software from modules on the car)

– BMW E-sys (used for coding newer BMW F series cars)

BMW ICOM Products:

1.2015.7V BMW ICOM A2+B+C With Wifi Support Multi-languages
2.New Super Version ICOM A2+B+C For BMW Diagnostic Programming Tool With 2015.7 HDD
3.2015 ICOM A2+B+C For BMW Diagnostic Programming Tool Without Software
4.BMW ICOM A2 Plus BMW ICOM 2014.12V Software For Lenovo Dell


UOBDII Official Blog All rights reserved BMW ICOM