Finally Xprog M V5.7.0 universal ECU programmer is tested fine to read write ECU with new authorization (see details as below), and newly released at uobdii.com, price only 139USD+shipping cost.
Xprog M V5.7.0 new feature:
Xprog M V5.7.0 is the only version XPROG-M can decrypt new version BMW CAS4.
With hard disk and USB Dongle, it is more convenient and secure.
Add new authorization: AUTH-0025 Authorized 3/13/2016
Here my steps to install Xprog M V5.7.0 on WIN7 / XP and read write ECU. Please follow the steps and it should work for you also.
PS: for the Xprog M V5.7.4, you need to try it at your risk, but for our V5.7.0, You do not have to worry about it may damage your device.
- You are not allowed to update the older version to the newest 70.
- To install V5.70, the older version has to be installed. The hardware uobdii.com supplied is not compatible with the lower or higher version software.
- Please uninstall the computer anti-virus software, otherwise X-prog software may be killed.
- Disconnect the internet; otherwise the hardware may be damaged.
- Not allowed to update at your will.
OS: WIN7 and XP
- Install Adobe Reader XI
- Install Registry Editor
- Open folder “Xprog-BOX 5.7 English” and click “XprogDesktop”
- Plug device to the computer and get message “Driver not successfully installed”. Then click “My Computer”, then “Management”, then “Device Manager”, right click
“Xprog”-hex” and choose update driver to install driver software… Then back to “Device Manager” and right click on “USB Serial Port” to update driver software.
Finally you can see “Xprog-box programmer (COM3)” under “Ports (COM & LPT).
- On the “Universal Xprog software – V5.7.0”, click “Update” and you can see the authorization as follows.
- Click “Device” to select the one you want to read and write.
XPROG-M V5.70 authorization includes:
AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, …) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, …) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage,chassis number (VIN), serial number and PIN code).
AUTH-0024-3 9S12XE SECURITY
AUTH-0025-1 MPC/SPC5xxx Authorized 11/4/2014
I won’t describe all the steps that i do, please continue reading writing ECU by following this video demo:
Finally I attach Xprog M V5.7 full package, you can see its package includes:
ADP-0001 TMS370 PLCC28 programming adapter
ADP-0002 TMS370 PLCC44 programming adapter
ADP-0003 TMS370 PLCC68 programming adapter
ADP-0004 Motorola HC05B/X PLCC52 programming adapter
ADP-0005 Motorola HC05B/X QFP64 programming adapter
ADP-0006 ST M35080 in-circuit programming adapter
ADP-0008 TMS374 family in-circuit programming adapter
ADP-0009 MC68HC05V12 programming adapter
ADP-0010 TMS374 on-board programming adapter
ADP-0011 HC11EA9/E9 programming adapter
ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter
Additional adaptor for 5M48H P-Flash
UOBDII All rights reserved Xprog M V5.7.0 ECU programmer with AUTH-0025 installation on WIN7 / XP