Yanhua Mini ACDP authorize new function on BMW EGS ISN clearing.So here UOBDII want to share this step-by-step guide for you.
What You Need?
Here is Video Guide:How to Use Yanhua ACDP to Reset BMW ISN 8HP EGS
Step 1:Build Connection between BMW EGS and Yanhua Mini ACDP Programmer.
Note:There are 3 methods,please choose according to your situation.
Connection Method 1:
Connect the 8HP end of the EGS interface board to the EGS module interface
Note:Aim the label point of the 8HP end of the interface board with the label point of the EGS interface during installation.
Short the CAN termination resistor on the OBP+ICP adapter to the “CAN-R-Join” terminal
Note:Short the jumper cap to the “CAN-R-Join” end according to the marked position.
Connect the ACDP,OBP+ICP adapter,EGS interface board and EGS module
Connection Method 2:
Connect ACDP with vehicle OBDII port
Connection Method 3:
Connect ACDP to EGS interface according below diagram
Step 2:Clear BMW EGS ISN
Run Yanhua ACDP software and enter the menu to select “Clear EGS ISN”
Select “Clear ISN”,or if you have and problem please check the “Help” option
UOBDII Official Blog All rights reserved Step by Step Guide on Yanhua ACDP Clear BMW EGS ISN