uobdii.com engineer will answer some questions on Lonsdor KH100 Remote Key Programmer in this post, including,and for KH100 beginner guide,here:Lonsdor KH100 User Guide:How to Use,Registration,Activation
Lonsdor KH100 function menu:
Access Control Key
Enter this menu, follow system prompts to operate (as shown).
3.What chip Lonsdor KH100 can simulate?
Simulate 4D chip
Simulate 46 chip
Simulate 48 chip
Put Lonsdor KH100’s antenna at the ignition switch(as shown), choose the corresponding chip
type to simulate.
Put the above chip into the induction slot(as shown), choose the corresponding chip to operate according to the prompts.
Note: some chip data will be covered and locked.
Generate Remote (Generating various type)
Generate smart key
1) Lonsdor KH100 generates Remote
Enter [Generate key]->[Generate remote], choose the corresponding vehicle type to
generate remote control(as shown) according to different regions.
2) Lonsdor KH100 generates smart key
Enter [Generate key]->[Generate smart key] menu,choose the corresponding vehicle
type to generate smart key/card(as shown) according to different regions.
Put KH100 antenna close to the pre-determined position. If signals are identified, the device will continuously make sounds.
1 Search smart induction area
Connect remote key with remote connector, Put KH100’s antenna close to the
pre-determined position. If inductive signal is identified, the device will continuously
make sounds, please check if the position is right(as shown below).
Connect remote key with remote connector, Put KH100’s antenna close to key
identification coil, and use key to turn ignition ON. When KH100 buzzer beeps, it means
signal is detected.
7.Lonsdor KH100 can detect remote frequency and how?
Enter this menu, put remote control at the device’s induction area to detect remote frequency.
Detect Infrared signal
Toyota smart key (Unlock Toyota smart key)
Fixed code remote copy
Fixed code remote editing
1) Detect infrared signal
Put remote control at the infrared signal detection area, press the remote’s button
once. When the light on KH100’s screen is on, it indicates there is infrared signal,
otherwise there is no signal(see below pic).
2) Unlock Toyota smart key
Put in smart key, click OK to operate.
Enter settings menu, and connect the device to network, then choose [check for
updates], one-click online upgrade.
Lonsdor KH100 on sale