Launch Golo M-Diag Lite Bluetooth for IOS Android is a plug and play OBDII full-system diagnostic tool with special functions e.g. bi-directional capability, Oil / Service reset, ABS bleeding, IMMO & key programming, throttle body adaptation, brake pads, steering angle reset, battery matching, DPF regeneration, Injector coding.
Launch Golo M-Diag Lite Bluetooth all info here incl. Golo M-Diag Lite function, update, language, vehicle coverage, software download, registration & login, activation, installation, purchase diagnostic software.
Launch M-Diag Lite top features:
- Customizable: M-Diag is optional to purchase manufacturer specific carline software.
- Full-system diagnostic (With manufacturer specific carline software)
- with bi-directional capability
- Support multiple special function software (With manufacturer specific carline software)
- Actuation tests. (With manufacturer specific carline software)
Based on IOS or Android smart phone
Communication: Bluetooth BT 2.0
Golo M-Diag Lite Update:
Update and download software at Launch golo official site: www.goloiov.com
Golo M-Diag Lite Language available:
English, Chinese, Spanish, French, Russian
Launch Golo M-Diag Lite Vehicle coverage:
Cover the generic OBD, CAN bus, and proprietary protocols of over70 car manufacturers and 2500 car models.
Least Expensive Vehicles:
GAZ, VAZ, Great Wall, Chery, Daihatsu, Suzuki, Isuzu, BYD, MAHINDRA, MARUTI, TATA, PROTON, Luxgen, PERODUA, Daewoo, Guangzhou Automobile Trumpchi, Geely
Economy Vehicles:
Hyundai, Kia, Mitsubishi, SUBARU, Mazda, Nissan, Toyota, Renault, Dodge, DACIA, Ford, Chevrolet, GM, HOLDEN, Peugeot, SAAB, SMART, Volkswage, Fiat, ROVER, Opel, Vauxhall, SKODA, Citroen, SEAT, Honda, Buick, Chrysler, Jeep, Ssangyong
Luxury Vehicles:
Mercedes-Benz commercial vehicles, AUDI, BMW, Mini, Rolls Royce, Porsche, Mercedes, Maybach, Bentley, Bugatti, Abarth, Lancia, Romeo, Volvo, Jaguar, Land Rover, Acura, Lexus, Infiniti, Lincoln, Cadillac, Maserati, Ferrari, Aston Martin
Launch M-Diag Lite Function:
I/M Readiness Monitor
Read DTC’s
Clear DTC’s
Read Freeze Frame Data
Read and Graph Data Stream PID’s
Full System Scan *
Actuation Tests *
M-Diag Lite Special Functions * including: IMMO & key programming, Odometer ajustment, Oil / Service reset, ABS bleeding, TPS throttle body adaptation, brake pads, steering angle reset, battery matching, DPF regeneration, Injector coding, Tire Pressure Warning Light Reset, gear learning.
* With manufacturer specific carline software
M-Diag Lite Specs:
Vehicle port: standard OBDII port
Bluetooth: BT 2.0
Typical power consumption: (12V) quiescent current 25mA
Device operating current: 35mA
Operating Temperature: -20 to 55℃ ( -4 to 131°F )
Storage Temperature: -30 to 70℃ ( -22 to 158°F )
Storage humidity: < 80%
Operating humidity: < 60%
Dimensions: 48mm × 24mm × 65mm
Net Weight: 55g
Operating voltage: Vehicle battery DC entry 9 to 15V
Launch M-Diag Lite Working Status:
Constant green light: Working normally
Flickering red light: Bluetooth connecting
Download and install the M-Diag Lite App
1.M-Diag App available on the Apple App Store and Google Play Store.
2. Scan the QR Code to download the App
Note:
Due to the system restraints of Apple iOS, a new App will be required to install on the first time to open the diagnostic software. Please use the M-Diag App to perform vehicle diagnosis.
FCC Caution:
This device complies with part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the fo1lowing measures:
– Reorient or relocate the receiving antenna.
– increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
1. M-Diag Lite User registration and login
Enter your email address to apply for a user account
2. M-Diag Lite device activation
Enter the S/N and A/C (Activation Code) in the password envelope to active the M-Diag device.
3. M-diag Lite device installation
Step 1: Find the OBDll port,which is usually located underneath the dashboard;
Step 2:Plug the M-Diag into the OBDll port of the vehicle and the LED indicator will light up to show the operating status.
Note:
1. Remove the M-Diag Lite after using. Do not leave it in the OBDll port;
2. Turn off the ignition before plugging or unplugging the M-Diag device.
Purchase diagnostic software
Ste 1: Tap on “Purchase more carline software” to enter the car line software list.
Ste 2: Select the carline software, tap on the vehicle icons to see more carline software details.
Step 3: Tap on “Purchase” to enter the purchase confirmation page.
Ste 4: Tap on “Pay” and follow the instructions to complete payment.
Ste 5: Enter the carline software download page after payment complete.
